CORNING OV-1000 V2 CALIBRATION and CORNING OV-1000 V2 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the CORNING OV-1000 V2 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   CORNING OV-1000 V2 (OV-1000V2)   Description / Specification:    
CORNING OV-1000 V2 Optical Time Domain Reflectometer Mainframe

The Corning Cable Systems OV-1000 V2 Optical Time Domain Reflectometer (OTDR) provides testing flexibility by combining a rugged platform with field-interchangeable multimode, single-mode and advanced testing modules. Designed for testing and troubleshooting of LAN, Telco, CATV and FTTx networks, all OTDR modules can be used as continuous wave (CW) light sources. A video inspection probe, power meter and visual fault locator (VFL) are available as options on the mainframe. The OV-1000 V2 also has an internal 8 gigabyte flash memory that stores at least 1500 traces and eliminates the need for a hard drive, which can fail under extreme field conditions. For extra storage capacity, the unit offers three (3) USB ports for portable file transfer. The OV-1000 V2 OTDR product line offers a wide variety of multimode and single-mode modules and has the capacity to hold up to two modules at the same time. Modules can be easily switched out in the field in just a matter of seconds, without the use of tools. The touchscreen keyboard eliminates the need for an external keyboard and has a rugged, splash-proof mainframe that allows for testing in harsh conditions. The 6.4-in color touchscreen is resistant to shock, water and most common chemicals used in the field. It is large enough to view both the trace and the event table simultaneously, which eliminates the need to toggle back and forth between the two. The unit accommodates up to two field interchangeable modules eliminating the need to change modules as often and offers instantaneous AutoSync USB for easier, faster file transfers and software upgrades. With four test modes — auto, advanced, template, and fault-finder — the OV-1000 V2 is future-ready with the ability to accept protocol testing modules, such as Gigabit Ethernet.



 

Standard Calibration $220.00 *
*This is a Web introductory price for one calibration of the CORNING OV-1000 V2. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Extinction Ratio (ER)
Extinction Ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, (example a laser diode), where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage.

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Wavelength Repeatability
Wavelength Repeatability is the random uncertainty in reproducing a wavelength after detuning and re-setting the wavelength. The wavelength repeatability is ± half the span between the maximum and the minimum value of all actual values of these wavelengths. Example test condition: uninterrupted TLS output power, constant power level, temperature within operating temperature range, coherence control off, short time span. Note: NOTE The long-term wavelength repeatability can be obtained by taken the wavelength repeatability and wavelength stability into account.

Please contact us for your CORNING OV-1000 V2 CALIBRATION and/or CORNING OV-1000 V2 Optical Time Domain Reflectometer Mainframe REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: