EXFO IQ-1100 CALIBRATION and EXFO IQ-1100 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the EXFO IQ-1100 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Meter?
Shop for Comparable Products on our  used Optical Power Meter page or new Optical Power Meter page

 
   EXFO IQ-1100   Description / Specification:    
EXFO IQ-1100 Single Channel Optical Power Meter Module

The Exfo IQ-1100 Benchtop Optical Power Meter Module series provides accurate power measurements over a high dynamic range along with high resolution and excellent linearity. Use the IQ-1100 Power Meters for automatically measuring discrete values such as insertion loss or, alternately, for continuous monitoring and data acquisition. The IQ-1100 Power Meters offer ± 0.015 dB linearity with a ± 5 % absolute uncertainty and a 0.001 dB power resolution. Whether you are measuring absolute or relative power levels, count on accurate and precise measurements. Both high-power Ge and InGaAs photodetectors are available. For general power measurements, an InGaAs detector offers a 110 dB (+9 dBm to -100 dBm) power range in the 800 to 1700 nm wavelength range. InGaAs is also the detector of choice when temperature stability is an important consideration. Select a high-power Ge detector when measuring relatively high power (up to 20 dBm) in the 750 to 1700 nm wavelength range. EXFO’s IQ-1100 single-channel power meter module series is part of the IQ solution. The IQ-203 mainframe and IQ-206 expansion units support up to 27 modules. For a virtually unlimited number of channels, link two or more systems together through the GPIB interface. The sensitivity of this detector is -75 dBm. Specifications (detector dependent). Number of detectors: 1. Detector type: GeX or InGaAs. Wavelength range (nm): 750 to 1700. Power range (dBm): 20 to -100. Linearity (dB): ±0.015 (10 dBm to –60 dBm), Noise (peak-to-peak) (pW): n/a, Power resolution (dB): 0.001 (20 dBm to -60 dBm). Wavelength resolution (nm): 1.



 

Standard Calibration $370.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the EXFO IQ-1100. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chromatic Dispersion
Chromatic Dispersion is a broadening of the input signal as it travels down the length of the fiber. Chromatic Dispersion results from a variation in propagation delay with wavelength, and is affected by fiber materials and dimensions.

Detector
A Detector is a signal conversion device that converts power from one form to another, such as from optical power to electrical power

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Polarization Mode Dispersion (PMD)
Polarization mode dispersion (PMD) is a form of modal dispersion where two different polarizations of light in a waveguide, which normally travel at the same speed, travel at different speeds due to random imperfections and asymmetries, causing random spreading of optical pulses. It is he difference between the maximum and minimum values of loss typically measured in ps/km^1/2.

Please contact us for your EXFO IQ-1100 CALIBRATION and/or EXFO IQ-1100 Single Channel Optical Power Meter Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: