INSTEK GOM-801H CALIBRATION and INSTEK GOM-801H REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the INSTEK GOM-801H Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another General Meter?
Shop for Comparable Products on our  used General Meter page

 
   INSTEK GOM-801H   Description / Specification:    
INSTEK GOM-801H 3 1/2 Digit DC Milli-ohm Meter

The GW Instek GOM-801H milliohm meter is equipped with a 3 1/2 digit 0.5" red LED with comparator indicators. Measurable objects can cover cable joints, earth bonds, switches, motors, transformers and generators. The front panel features seven selectable test ranges, 20 m-ohm to 20 k-ohm. The internal comparator is fully adjustable for the user settable Hi/Lo comparison indicator. Specifications. Test Ranges: 20, 200 m-ohm, 2, 20, 200 ohm, 2k, 20 k-ohm. Test Current (Test Voltage 0.2V): 20 m-ohm / 200 m-ohm, 1 A; 2 ohm, 0.1 A; 200 ohm, 1 mA; 2 k-ohm, 100 uA; 20 k-ohm, 10 uA. Measurement Accuracy: 20 m-ohm, ± (0.2% rdg + 6 digits); 200 m-ohm to 20 k-ohm, ± (0.2% rdg + 4 digits). Setting Accuracy: ± (0.2% + 6 digits). Resolution: 0.01 ohm, 0.1 ohm, 1 ohm, 10 ohm, 100 m-ohm, 1 ohm, 10 ohm. Comparator: HI, LO settable.



 

Standard Calibration $115.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the INSTEK GOM-801H. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).

Please contact us for your INSTEK GOM-801H CALIBRATION and/or INSTEK GOM-801H 3 1/2 Digit DC Milli-ohm Meter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: