NEW DEVISER NA7100A SALES and DEVISER NA7100A CALIBRATION

 
Custom-Cal has for sale a new DEVISER NA7100A. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the DEVISER NA7100A. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our
 used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
List Price for a new DEVISER NA7100A, $9,895.00   DEVISER NA7100A   Description / Specification:    
DEVISER NA7100A 1 GHz Vector Network Analyzer, 50 ohm

The Deviser NA7100A 1 GHz Vector Network Analyzer 50 ohm, features high accuracy and large dynamic range, which adopted Direct Digital Synthesis (DDS) signal generator and multi-receiver technique. So it can quickly measure the important index such as transmission, reflection, phase and group delay. NA7100 is the perfect tool to test linear or nonlinear equipment of RF system (Radio Station, CATV, communication receiver or other wireless communication systems). The NA7100A is ideal for testing of narrowband filters, sound surface wave parts, amplifiers, antennas, impedance transforming subassembly, cable etc. Also automatic conformity testing and rapid testing is favorite and useful for volume production. Features. Two channels, Four traces display. Fast sweep time. Save/ print/ recall function. USB, parallel, RS-232 and VGA, LAN interface. Automatic PASS/FAIL judgement. Specifications. Source Characteristics; Frequency Range: 300 KHz to 1.3 GHz. Frequency stability: <= ±5 ppm. Frequency Resolution: 1 Hz. Phase Noise: <= -67 dBc/Hz (10K HZ Offset). Output Level Range: -50 dBm to +10dBm. Level Accuracy: <= ±1.5 dB(25C +5C). Harmonic Rejection: >= -30 dBc (>1MHz) <= -25 dBc (300 KHz to 1 MHz). Directivity: >= 50 dB (After Vector calibration). VSWR: <= 1.3. Receiver Characteristics; Resolution Bandwidth: 100 Hz to 15 KHz. Dynamic Range: >= 100 dB (RBW = 1 KHz). Level Accuracy: <= ±1.5 dB. Measurement Resolution: 0.01dB. Maximum Input Level: +10 dBm. VSWR: <= 1.2. Phase Characteristics; Phase Resolution: 0.01°. Phase Veracity: 0.5° (RBW = 1 KHz), 1° (RBW = 3 KHz). Display Characteristics: Sweep Time: 150 ms/field to 5 s/field (201points). Display: 7.5" Color TFT LCD.



 

Standard Calibration $560.00 *
*This is a Web introductory price for one calibration of the DEVISER NA7100A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.


Please contact us for your new DEVISER NA7100A sale price and/or DEVISER NA7100A CALIBRATION

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: