ILX LIGHTWAVE OMH-6732B CALIBRATION and ILX LIGHTWAVE OMH-6732B REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE OMH-6732B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Sensor?
Shop for Comparable Products on our
 used Optical Power Sensor page or new Optical Power Sensor page

 
   ILX LIGHTWAVE OMH-6732B   Description / Specification:    
ILX LIGHTWAVE OMH-6732B 350 to 530 nm Silicon Optical Power/Wavelength Head

The ILX OMH-6732B Optical Power and Wavelength Measurement Head provides flexibility to easily and accurately measure the optical power and wavelength of laser sources from the blue to the near infrared spectrum. These products incorporate ILX’s unique integrating sphere-based power and wavelength measurement capability. The OMH-6732B power/wavehead provides accurate power and wavelength measurement from 350 to 530 nm. ILX OMH-6732B integrating sphere simplifies optical power measurements of laser diodes and LEDs by eliminating measurement problems related to detector saturation, alignment beam profile, polarization, and back reflection. Integrating spheres are inherently insensitive to beam profiles, providing you with more flexibility in laser type and launch conditions.
Specifications.

Wavelength Range: 350 to 530 nm.
Accuracy: ±0.5 nm.
Detection (minimum power required): -10 dBm.
Temperature Coefficient: <-0.03nm/°C (typical).
Power Range: -40 to +30 dBm.
Damage Threshold: +42 dBm.
Accuracy: ±3.5%.
Sensor Type: Silicon.
Noise: 5 nW p-p (typical).
Linearity Temperature Coefficient: 0.1% /°C (typical).



 



Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
Optical power referenced to 1 millimatt

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Refractive Index
The refractive index or index of refraction of a substance is a measure of the speed of light in that substance. It is expressed as a ratio of the speed of light in vacuum relative to that in the considered medium. The velocity at which light travels in vacuum is a physical constant, and the fastest speed at which energy or information can be transferred. However, light travels slower through any given material, or medium, that is not vacuum.

Total insertion loss
A measure of the loss of light within an optical component


Please contact us for your ILX LIGHTWAVE OMH-6732B CALIBRATION and/or ILX LIGHTWAVE OMH-6732B 350 to 530 nm Silicon Optical Power/Wavelength Head REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: