ILX LIGHTWAVE OMH-6722B CALIBRATION and ILX LIGHTWAVE OMH-6722B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE OMH-6722B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Sensor?
Shop for Comparable Products on our  used Optical Power Sensor page or new Optical Power Sensor page

 
   ILX LIGHTWAVE OMH-6722B   Description / Specification:    
ILX LIGHTWAVE OMH-6722B 400 to 1100 nm Silicon Optical Power/Wavelength Head

The ILX OMH-6722B Optical Power and Wavelength Measurement Head provides flexibility to easily and accurately measure the optical power and wavelength of laser sources from the blue to the near infrared spectrum. These products incorporate ILX’s unique integrating sphere-based power and wavelength measurement capability. The OMH-6722B power/wavehead provides accurate power and wavelength measurement from 400 to 1100 nm. ILX OMH-6722B integrating sphere simplifies optical power measurements of laser diodes and LEDs by eliminating measurement problems related to detector saturation, alignment beam profile, polarization, and back reflection. Integrating spheres are inherently insensitive to beam profiles, providing you with more flexibility in laser type and launch conditions.
Specifications.

Wavelength Range: 400 to 1100 nm.
Accuracy: ±1.0 nm.
Detection (minimum power required): -20 dBm.
Temperature Coefficient: <-0.03nm/°C (typical).
Power Range: -40 to +30 dBm.
Damage Threshold: +42 dBm.
Accuracy: ±3.5%.
Sensor Type: Silicon.
Noise: 5 nW p-p (typical) at 980 nm.
Linearity Temperature Coefficient: 0.1% /°C (typical).



 



Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your ILX LIGHTWAVE OMH-6722B CALIBRATION and/or ILX LIGHTWAVE OMH-6722B 400 to 1100 nm Silicon Optical Power/Wavelength Head REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: