NEW DEVISER E7100A SALES and DEVISER E7100A CALIBRATION
 
Custom-Cal has for sale a new DEVISER E7100A. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the DEVISER E7100A. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
List Price for a new DEVISER E7100A, $5,595.00   DEVISER E7100A   Description / Specification:   Spec Sheet 
DEVISER E7100A 6100 MHz Cable & Antenna Analyzer

The Deviser E7100A 6100 MHz Cable & Antenna Analyzer is a perfect instrument for wireless and broadcasting base station. It covers 25 MHz to 6100 MHz frequency span and fits for the wireless communication and broadcasting market. With >42 dB return loss dynamic range, E7100A series verifies the cable and antenna system which conform to performance specifications. Cable loss function measures insertion loss within the cable feedline system. The E7100A series automatically calculates the average cable loss. Specifications. Frequency Range: 25 MHz to 4400 MHz. Frequency Resolution: 1 kHz. Frequency Accuracy: ±5 ppm. Output Power Level: 0 dBm typical. Sweep Time: 1.5 ms/point. Data Points: 130, 259, 517, 1033, 2065. RF Immunity: +13 dBm within ±10 kHz of the carrier frequency, +20 dBm @ >1.0 MHz from carrier frequency. Corrected Directivity: >42 dB after OSL calibration, >38dB after ECAL. Return Loss Range: 0.00 to 60.00 dB. Return Loss Resolution: 0.01 dB. VSWR Range: 1 to 65. VSWR Resolution: 0.0001. Cable Loss Range: 0.00 to 30.00 dB. Cable Loss Resolution: 0.01 dB. DTF Return Loss Range: 0.00 to 60 dB. DTF VSWR Range: 1 to 65. DTF Length: 0 to (Data points-1)/(Span×2) × Vp × C, Span=frequency range. DTF Resolution (m): =Vp × C /(Span×2). RF Output Port: NF Type. Impedance: 50 ohm. Display: 6.5” TFT LCD, 640*480. Interface: 1 USB2.0, 1 mini USB, 1 10 M / 100 M LAN port. Weight < 2.2 kg (5 lbs).



 

Standard Calibration $605.00 *
*This is a Web introductory price for one calibration of the DEVISER E7100A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your new DEVISER E7100A sale price and/or DEVISER E7100A CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: