ADVANTEST R3467 CALIBRATION and ADVANTEST R3467 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ADVANTEST R3467 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ADVANTEST R3467   Description / Specification:    
ADVANTEST R3467 3.3 GHz RF Spectrum Analyzer

The Advantest R3467 is a high performance 3.3 GHz spectrum analyzer that offers a 25 MHz analysis bandwidth as standard and are suited for the evaluation of 3GPP (HSDPA), CDMA2000, EVDO, WLAN devices, as well as the development, installation and maintenance of base stations. Employing unique and innovative technology, the R3467 achieves a wide dynamic range. This dynamic range means that no other equipment is required to easily perform the spurious emissions measurement specified in the 3GPP measurement standard "Category B". This spectrum analyzer also contributes to greater measurement efficiency with a high-speed modulation analysis throughput that is ten times that of previous models. Level accuracy is also double that of previous models, to support the measurement uncertainty required by 3GPP. The R3467 provides not only USB but also GPIB and LAN ports as standard interfaces, making it easy to save measurement results to a high-capacity USB memory and process and analyze them using a PC. Specifications. Frequency range: 9 kHz to 3.3 GHz. Frequency span: 20 Hz to 3.3 GHz and zero span. Span accuracy: <±1%. Resolution bandwidth: 1Hz to 10 MHz. Frequency reference stability: 5 × 10^-8/day. SSB phase noise: -100 dBc/Hz (10kHz offset). Maximum input level: +30 dBm. Average display noise level: -156 dBm/Hz typ. (@2GHz, Preamp off), -168 dBm/Hz typ. (@1GHz Preamp on). TOI: >+21 dBm (1 GHz - 2 GHz). 1dB gain compressor: >+7 dBm(Preamp off, 200 MHz to 3.3 GHz). Sweep time: 2 ms to 2000 s (at frequency sweep), 1 µs to 6000 s (at Zero Span).



 

Standard Calibration $380.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ADVANTEST R3467. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).

Please contact us for your ADVANTEST R3467 CALIBRATION and/or ADVANTEST R3467 3.3 GHz RF Spectrum Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: