JDSU E4126MA CALIBRATION and JDSU E4126MA REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the JDSU E4126MA Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   JDSU E4126MA (MTS4126MA)   Description / Specification:    
JDSU E4126MA Metro Access 1310/1550 nm OTDR Module

The JDSU E4126MA 1310/1550 nm OTDR module lets field technicians rapidly, reliably, and cost-effectively install, turn up, and troubleshoot any optical network architecture—enterprise, metro, and FTTx/access point-to-point or point-to-multipoint passive (PONs). It is used with the T-BERD/MTS-2000, -4000, -5800 platforms. Standard testing features include: Automatic macrobend detection, Summary results table with pass/fail analysis, Bidirectional OTDR analysis, Fast-Report - onboard report generation. Specifications. Distance measurement; Mode: Automatic or dual cursor. Display range: 0.5 up to 260 km. Cursor resolution: 1 cm. Sampling resolution: 4 cm. Accuracy: ±1 m ±sampling resolution ±1.10^-5 x distance (excluding group index uncertainties). Attenuation Measurement; Mode: Automatic, manual, 2-point, 5-point, and LSA. Display range: 1.25 to 55 dB. Display resolution: 0.001 dB. Cursor resolution: 0.001 dB. Linearity: ±0.03 dB/dB/±0.05 for LA. Threshold: 0.01 to 5.99 dB in 0.01 dB steps. Reflectance/ORL Measurements; Reflectance accuracy: ±2 dB. Display resolution: 0.01 dB. Threshold: -11 to -99 dB in 1 dB steps. Central Wavelength: 1310 ±20 nm, 1550 ±20 nm. Event Dead Zone: 0.9 m. Source and Broadband Power Meter (optional), CW source output power level: -3.5 dBm.



 

Standard Calibration $475.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the JDSU E4126MA. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your JDSU E4126MA CALIBRATION and/or JDSU E4126MA Metro Access 1310/1550 nm OTDR Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: