ROHDE & SCHWARZ ZVA40 CALIBRATION and ROHDE & SCHWARZ ZVA40 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ ZVA40 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Network Analyzer, SNA, VNA?
Shop for Comparable Products on our  used Network Analyzer, SNA, VNA page or new Network Analyzer, SNA, VNA page

 
   ROHDE & SCHWARZ ZVA40   Description / Specification:   Spec Sheet 
ROHDE & SCHWARZ ZVA40 40 GHz Vector Network Analyzer

The R&S ZVA40 40 GHz Vector Network Analyzer series is an ideal choice for measurements on active and passive components and modules, which require high performance and wide versatility. It instruments support scalar and vector measurements on mixers and converters (linear and nonlinear) and noise measurements on amplifiers as well as pulsed measurements for aerospace and defense applications. Models include; 1145.1110.40 2 ports 2.92 mm (m), 1145.1110.43 2 ports 2.4 mm (m), 1145.1110.42 4 ports 2.92 mm (m), 1145.1110.45 4 ports 2.4 mm (m). Specifications. Number of test ports: 2 or 4. Frequency range: 10 MHz to 40 GHz. Measurement time per test point: < 3.5 µs. Measurement time, 201 test points: 4.7 ms. Switching time Between channels: < 1 ms. Max. dynamic range at 10 Hz measurement bandwidth Between test ports: 130 dB, typ. > 140 dB. Output power at test port: > 13 dBm, typ. 18 dBm. Power sweep range: > 40 dB, typ. 50 dB. IF bandwidths: 1 Hz to 30 MHz. Channels, diagrams, traces: > 100. Test points per trace: 1 to 60001. Test ports: 2.92 mm (m) or Test ports: 2.4 mm (m). Options. ZVA40-B16, Direct Generator/Receiver Access. ZVA40-B21, Generator Step Attenuator Port 1. ZVA40-B22, Generator Step Attenuator Port 2. ZVA40-B23, Generator Step Attenuator Port 3. ZVA40-B24, Generator Step Attenuator Port 4. ZVA40-B31, Receiver Step Attenuator Port 1. ZVA40-B32, Receiver Step Attenuator Port 2. ZVA40-B33, Receiver Step Attenuator Port 3. ZVA40-B34, Receiver Step Attenuator Port 4. ZVAB-B4, Oven Quartz (OCXO). ZVAB-B14, Universal Control Interface I/O Port. ZVAB-K2, Time Domain. ZVA-K4, Frequency Conversion. ZVA-K5, Mixer Phase Measurement. ZVA-K6, True Differential Mode. ZVA-K7, Pulsed Measurements. ZVA-K8, Converter Control Software. ZVA-K9, Mixer Delay without LO Access. ZVA-K17, 5 MHz Receiver Bandwidth. ZVA-K27, Internal Pulse Generators. ZVA-K30, Noise Figure Measurements.



 

Standard Calibration $760.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ ZVA40. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Mismatch Uncertainty
Mismatch Uncertainty is caused by re-reflections between one device (the source) and the device that follows it (the load).

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).

Please contact us for your ROHDE & SCHWARZ ZVA40 CALIBRATION and/or ROHDE & SCHWARZ ZVA40 40 GHz Vector Network Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: