ANRITSU S331L CALIBRATION and ANRITSU S331L REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU S331L Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   ANRITSU S331L   Description / Specification:   Spec Sheet 
ANRITSU S331L 4 GHz Site Master Handheld Cable & Antenna Analyzer

The Anritsu S331L Site Master Handheld Cable & Antenna Analyzer replaces the current value line S331D which is part of the longest running portable cable and antenna analyzer family in history. Utilizing the latest advancements in technology, the S331L has been optimized for field conditions, is easy to use, and has efficient sweep management capabilities. The S331L delivers an entire workday of battery operating time, the most ever offered in a handheld cable and antenna analyzer. With its large outdoor viewable 7" TFT touch screen display, new intuitive GUI, and classic mode that mimic the S331D basic measurement flow, the S331L is very easy to use, and can significantly increase a user’s efficiency in the field.
Specifications

Cable & Antenna Analyzer
Frequency Range: 2 MHz to 4 GHz.
Frequency Accuracy: <= ± 5 ppm @ 25 °C.
Frequency Resolution: 1 kHz.
Return Loss: <= 1.50 ms/data point, RF immunity low, typical.
Distance-to-Fault: <= 1.75 ms/data point, RF immunity low, typical.
Interference Immunity On-Channel: +17 dBm outside calibrated sweep range.
Interference Immunity On-Frequency: +13 dBm within calibrated sweep range.

Internal Power Meter
Frequency Range: 50 MHz to 4 GHz.
Display Range: -100 dBm to +100 dBm.
Measurement Range: -33 dBm to +20 dBm.
Offset Range Max: ± 100 dB, user settable value.

General
Measurements: Return Loss, VSWR, Cable Loss, Distance-to-Fault RL, Distance-to-Fault VSWR, RF Power.
Internal Trace Storage: > 1000 files (files may be traces, setups, screen shots, or any combination).
External Trace Storage: Limited only by size of USB Flash drive.
Connectivity: (2) USB 2.0 Type A, Interface: Type mini-B, Connect to PC for data transfer.
Display: TFT Resistive Touch Screen, 7.0” daylight viewable color LCD, 800 x 480 resolution.



 

Standard Calibration $550.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU S331L. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your ANRITSU S331L CALIBRATION and/or ANRITSU S331L 4 GHz Site Master Handheld Cable & Antenna Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: