ANRITSU MT8222B CALIBRATION and ANRITSU MT8222B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MT8222B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   ANRITSU MT8222B   Description / Specification:   Spec Sheet 
ANRITSU MT8222B 6 GHz BTS Master High Perf. Handheld Base Station Analyzer

The Anritsu MT8222B 6 GHz BTS Master High Performance Handheld Base Station Analyzer has been designed to support 4G standards and installed 2G/3G networks. The MT8222B's platform provides a 20 MHz demodulation capability to support LTE bandwidths from 1.4 to 20 MHz. It also features a 30 MHz Zero-Span IF Output for external demodulation of virtually any other wideband signal. In addition, a Vector Signal Generator option is available for comprehensive receiver testing capability with the flexibility to generate two modulated signals plus noise. Cable and Antenna Analyzer Highlights; Measurements: RL, VSWR, Cable Loss, DTF, Phase, Gain. 2-port Gain Measurement Uncertainty: < 0.45 dB. 2-port Dynamic Range: > 80 dB. RF Immunity: +17 dBm on-channel, +10 dBm on-frequency. Calibration: OSL and FlexCal. Bias Tee: 32 V internal. Spectrum and Interference Analyzer Highlights; Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I. Interference Analyzer: Spectrogram, Signal Strength, RSSI, Signal ID. Dynamic Range: > 95 dB in 1 Hz RBW. DANL: -163 dBm in 1 Hz RBW. Phase Noise: -100 dBc/Hz @ 10 kHz offset. Frequency Accuracy: ± 25 ppb with GPS On.
Specifications.

Cable and Antenna Analyzer.
Frequency Range: 400 MHz to 6 GHz.
Frequency Accuracy: ± 3.0 ppm.
Frequency Resolution: 1 kHz (RF immunity low), 100 kHz (RF immunity high).
Output Power High: -7 dBm, typical, 1 or 2-port.
Output Power Low: -40 dBm, typical, 2-port.
Dynamic Range: 400 MHz to 3.0 GHz 80 dB, > 3.0 GHz to 4.0 GHz 70 dB.

Spectrum Analyzer.
Frequency Range: 150 kHz to 7.1 GHz (usable to 0 Hz).
Maximum Continuous Input: +30 dBm.
Tuning Resolution: 1 Hz.
Frequency Span Accuracy: ± 0.3 ppm (25 °C ± 25 °C) + aging, 10 Hz to 7.1 GHz including zero span.
Sweep Time: Minimum 100 ms, 10 µs to 600 s in zero span.
Resolution Bandwidth (RBW): 1 Hz to 3 MHz in 1-3 sequence ±10 % (1 MHz max in zero-span) (-3 dB bandwidth).

Power Meter.
Frequency Range: 10 MHz to 7.1 GHz.
Span: 1 kHz to 100 MHz.
Display Range: -140 dBm to +30 dBm, <= 40 dB span.



 

Standard Calibration $985.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MT8222B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

POS
Packet over SONET/SDH (POS), is a communications protocol for transmitting packets in the form of the Point to Point Protocol (PPP) over SDH or SONET, which are both standard protocols for communicating digital information using lasers or light emitting diodes (LEDs) over optical fibre at high line rates.

TDMA: Time Division Multiple Access
Time Division Multiple Access (TDMA) is a method of sharing a communications carrier by assigning separate time slots to individual users. A channel is defined by a carrier frequency and time slot.

Please contact us for your ANRITSU MT8222B CALIBRATION and/or ANRITSU MT8222B 6 GHz BTS Master High Perf. Handheld Base Station Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: