EXFO IQS-605P CALIBRATION and EXFO IQS-605P REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the EXFO IQS-605P Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Lightwave Measurement System?
Shop for Comparable Products on our  used Lightwave Measurement System page or new Lightwave Measurement System page

 
   EXFO IQS-605P   Description / Specification:    
EXFO IQS-605P 5-Slot Controller Unit Mainframe

The Exfo IQS-605P controller unit houses up to 5 test modules, integrating optical, transport and datacom test applications in a single platform, speeding up both setup and actual testing. It has numerous connectivity and remote control features. With Windows-based open architecture and Ethernet connectivity, the fully integrated IQS platform is the heart of your test system. It offers unmatched test automation, minimizing manual intervention and ensuring accurate, repeatable results. The IQS-610E expansion unit, allows you to integrate up to 90 additional test modules into your system. The IQS-600 platform series uses PC-based software, enabling you to carry out your whole test cycles within a common, highly flexible test environment. Specifications. Display: 8.4 in touchscreen, 800 x 600 color TFT. Interfaces: Dual 10/100/1000 Base-T Ethernet, Six USB ports, Serial RS-232, External keyboard/mouse, Parallel port, EXFO bus III output and External monitor port. Storage: Internal 160 Gbyte hard drive (minimum), Internal DVD+RW. Options. 00 = Standard hard disk, RHD = RAID 1 second hard disk. 00 = Without GPIB card, I3 = GPIB master/slave card.



 

Functional Test $110.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the EXFO IQS-605P. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Extinction Ratio (ER)
Extinction Ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, (example a laser diode), where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage.

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Wavelength Repeatability
Wavelength Repeatability is the random uncertainty in reproducing a wavelength after detuning and re-setting the wavelength. The wavelength repeatability is ± half the span between the maximum and the minimum value of all actual values of these wavelengths. Example test condition: uninterrupted TLS output power, constant power level, temperature within operating temperature range, coherence control off, short time span. Note: NOTE The long-term wavelength repeatability can be obtained by taken the wavelength repeatability and wavelength stability into account.

Please contact us for your EXFO IQS-605P CALIBRATION and/or EXFO IQS-605P 5-Slot Controller Unit Mainframe REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: