ROHDE & SCHWARZ PR100 CALIBRATION and ROHDE & SCHWARZ PR100 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ PR100 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   ROHDE & SCHWARZ PR100 (4079.9011.02)   Description / Specification:   Spec Sheet 
ROHDE & SCHWARZ PR100 7.5 GHz Portable Receiver

The R&S PR100 Portable Receiver operates in a wide frequency range from 9 kHz to 7.5 GHz. Whether used for monitoring emissions, detecting interference or locating miniature transmitters, the receiver always combines high mobility with maximum operating ease. The receiver and the R&S HE300 active directional antenna together form a compact receiving system. The receiver can also be used in conjunction with other antennas, e.g. broadband omnidirectional antennas. Specifications. RF data Frequency range: 9 kHz to 7.5 GHz. RF input Impedance: 50 ohm. Preselection 30 MHz lowpass filter: 9 kHz to 30 MHz. Preselection tuned bandpass filters: 20 MHz to 1.5 GHz. Preselection highpass/lowpass filter combination: 1.5 GHz to 7.5 GHz. IF spectrum display range: 1 kHz to 10 MHz (1/2/5/10/20/50/100/200/500 kHz, 1/2/5/10 MHz). Display modes normal (clear/write), average, max. hold, min. hold. IF demodulation bandwidths: 15 filters (specified values indicate 3 dB bandwidth). Demodulation modes: all demodulation bandwidths AM, FM, PULSE, I/Q. Frequency scan (FScan): start and stop frequency, step width (user-selectable). Frequency scan speed: up to 200 channels/s. Memory scan (MScan): memory locations 1024, user-programmable. Frequency scan speed: up to 150 channels/s. DF mode Frequency range: 20 MHz to 6 GHz. Software options. 4071.9306.02 - Panorama Scan. 4071.9358.02 - Internal Recording. 4071.9406.02 - Remote Control. 4071.9458.02 - Externally Triggered Measurements. 4071.9506.02 - Field Strength Measurement. 4071.9558.02 - SHF Frequency Processing for downconverter antennas. 4071.9958.02 - GPS Software Interface. 4096.2805.02 - Direction Finder Upgrade Kit.



 

Standard Calibration $605.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ PR100. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your ROHDE & SCHWARZ PR100 CALIBRATION and/or ROHDE & SCHWARZ PR100 7.5 GHz Portable Receiver REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: