ANRITSU MS2724C CALIBRATION and ANRITSU MS2724C REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS2724C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ANRITSU MS2724C   Description / Specification:   Spec Sheet 
ANRITSU MS2724C 20 GHz Spectrum Master Handheld Spectrum Analyzer

The Anritsu MS2724C 20 GHz Spectrum Master High Performance Handheld Spectrum Analyzer features over 30 analyzers in one to meet virtually every measurement need. It is used for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, regulatory compliance, or Wi-Fi and wireless network measurements. Measure: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Masks. Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping. Frequency Coverage: 9 kHz to 20 GHz. Dynamic Range: > 104 dB in 1 Hz RBW. DANL: –160 dBm in 1 Hz RBW @ 1 GHz preamp On. Phase Noise: –100 dBc/Hz @ 10 kHz offset at 1 GHz. Frequency Accuracy: ± 25 ppb with GPS On. 1 Hz to 10 MHz Resolution Bandwidth (RBW). Traces: Normal, Max Hold, Min Hold, Average, # of Averages. Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS. Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas. Limit Lines: up to 40 segments with one-button envelope creation. Resolution Bandwidths: from 1 Hz to 10 MHz. LTE Measurements up to 20 MHz. Options. 0007, Secure Data Operation. 0019, High-Accuracy Power Meter (requires Power Sensor). 0031, GPS Receiver (requires Antenna P/N 2000-1528-R or 2000-1652-R). 0025, Interference Analyzer (recommend Option 31). 0027, Channel Scanner. 0089, Zero-Span IF Output. 0431, Coverage Mapping (requires Option 31). 0509, AM/FM/PM Analyzer. 0090, Gated Sweep. 0009, I/Q Demodulation Hardware. 0024, I/Q Waveform Capture.



 

Standard Calibration $1,135.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MS2724C. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Resolution Bandwidth (RBW)
Resolution Bandwidth (RBW) is the minimum bandwidth over which you can separate two signals and still see them.

Please contact us for your ANRITSU MS2724C CALIBRATION and/or ANRITSU MS2724C 20 GHz Spectrum Master Handheld Spectrum Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: