AEROFLEX-IFR FM/AM-1100S CALIBRATION and AEROFLEX-IFR FM/AM-1100S REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AEROFLEX-IFR FM/AM-1100S Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   AEROFLEX-IFR FM/AM-1100S (1100S)   Description / Specification:    
AEROFLEX-IFR FM/AM-1100S Communications Service Monitor

The IFR FM/AM-1100S Communications Service Monitor is a digitally synthesized AM/FM/SSB receiver and signal generator. All components within the unit are solid state, with the exception of the CRT and several switches. The receiver is a quadruple conversion receiver, capable of receiving communication signals from 300 kHz to 999.9999 MHz. The signal generator is capable of generating modulated or unmodulated signals from 1 kHz to 999.9999 MHz. Specifications. RF Signal Generator Frequency Range: 100 Hz to 999.9999 MHz in 100-Hz steps. Frequency Accuracy: 5 x 10^-7 (±0.00005%). RF Output Power: -130 dBm to -35 dBm (1 kHz to 1 GHz). RF Output Power Accuracy: -110 to –35 dBm ±2.5 dB to 400 MHz, ±3.0 dB above 400 MHz. Oscilloscope Vertical Bandwidth: DC to 1 MHz (at 3-dB bandwidth). Horizontal Sweep Rate: 10 ms, 1 ms, 0.1 ms, 0.01 ms per division. Spectrum Analyzer Frequency Range: 1 MHz to 1 GHz. Dynamic Range: 70 dB (–30 dBm to –100 dBm). Bandwidth Resolution: 30 kHz. Audio Generator Frequency Range: 10.0 Hz to 20 kHz (Variable Tone), 1 kHz (Fixed Tone). Receiver/Monitor Frequency Range: 300 kHz to 999.9999 MHz. Resolution: 100 Hz. 10 dB Sinad Sensitivity: 2 µV (typical). Power Monitor Frequency Range: 1 MHz to 1000.00 MHz. Power Ranges: 0 to 4, 0 to 40 and 0 to 400 watts. Accuracy 1 to 600 MHz: ±7% of reading plus 3% of full scale. Accuracy 600 MHz to 1000.00 MHz: ±20% of reading plus 3% of full scale. Input Power: 100 watts continuous; 325 watts maximum.



 

Standard Calibration $700.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AEROFLEX-IFR FM/AM-1100S. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

PDH
Plesiochronous Digital Hierarchy (PDH) is a transmission system for voice communication using plesiochronous synchronisation. The transmitter adds dummy information bits to allow multiple channels to be bit interleaved. The receiver discards these bits once the signals have been demultiplexed. PDH combines multiple 2 Mb/s (E1) channels in Europe and 1.544 Mb/s (DS1) channels in the US and Japan.

Spectral Width
Spectral Width is the wavelength interval over which the magnitude of all spectral components is equal to or greater than a specified fraction of the magnitude of the component having the maximum value. In optical communications applications, the usual method of specifying spectral width is the full width at half maximum. This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most -3 dB).

Please contact us for your AEROFLEX-IFR FM/AM-1100S CALIBRATION and/or AEROFLEX-IFR FM/AM-1100S Communications Service Monitor REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: