NEW DEVISER E8000A SALES and DEVISER E8000A CALIBRATION
 
Custom-Cal has for sale a new DEVISER E8000A. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the DEVISER E8000A. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
List Price for a new DEVISER E8000A, $4,795.00   DEVISER E8000A   Description / Specification:   Spec Sheet 
DEVISER E8000A 3 GHz Handheld Spectrum Analyzer

The Devisor E8000A 3 GHz handheld spectrum analyzer is an ideal testing instrument for engineer working at the wireless base station for 2G/3G/4G, WiFi and broadcast installation and maintenance. It provides features such as signal strength indication, spectrogram and fluorogram to find out interference signals. The E8000A covers a frequency range of 100 kHz to 3000 MHz and has tracking generator option. The E8000A provides 1 ms minimum sweep time to detect any complex interference signals. Specifications. Frequency Range: 9 kHz to 3000 MHz. Frequency Resolution: 1 kHz. Frequency Stability: ±1 ppm. Frequency Span Range: 0 Hz (Zero Span), 1 kHz to 3000 MHz. Sweep and Trigger Range: 1 mSec to 250 sec (Span > 1 kHz), 20 µSec to 500 sec (Span = 0 Hz). Accuracy: < ± 0.2%. Resolution Bandwidth Range: 1 Hz to 3 MHz in 1-3-10 sequence. Bandwidth Accuracy: < ± 10%. Amplitude: Measurement Range Displayed average noise level to furthest safe input level. Input Attenuator Range: 0 dB to 55 dB. Attenuator Step: 5 dB. Internal Preamplifier Frequency Range: 1 MHz to 3000 MHz. Gain: 15 dB. Max. Safe Input: +30 dBm (peak power/input attenuation >15 dB), 50 VDC. Input Impedance: 50 ohm. Display Type: 6.5 inch TFT color LCD.



 

Standard Calibration $700.00 *
*This is a Web introductory price for one calibration of the DEVISER E8000A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Standing Wave Ratio (SWR)
Standing wave ratio (SWR) is the ratio of the amplitude of a partial standing wave at an antinode (maximum) to the amplitude at an adjacent node (minimum).

Please contact us for your new DEVISER E8000A sale price and/or DEVISER E8000A CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: