FLUKE 1550C REPAIR and FLUKE 1550C CALIBRATION
 
Custom-Cal has a high success rate in the repair of the FLUKE 1550C. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 1550C Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   FLUKE 1550C   Description / Specification:    
FLUKE 1550C 5 kV Insulation Tester

The Fluke 1550C Insulation Tester performs digital insulation testing up to 5 kV. It features remote operation, real-time trending, and can create reports quickly, using pre-designed templates that you can customize with company logos. It’s the perfect tool for preventive or predictive maintenance programs designed to identify potential equipment failures before they occur. It has a CAT IV 600 V safety rating.

Insulation Resistance Measurement Test voltage (DC).
250 V.
  Range: < 250 kΩ, 250 kΩ to 5 GΩ, 5 GΩ to 50 GΩ, > 50 GΩ.
  Accuracy (± reading): Unspecified, 5%, 20%, Unspecified.
500 V.
  Range: < 500 kΩ, 500 kΩ to 10 GΩ, 10 GΩ to 100 GΩ, > 100 GΩ.
   Accuracy (± reading): Unspecified, 5%, 20%, Unspecified.
1000 V.
  Range: < 1 MΩ, 1 MΩ to 20 GΩ, 20 GΩ to 200 GΩ, > 200 GΩ.
  Accuracy (± reading): Unspecified, 5%, 20%, Unspecified.
2500 V.
  Range: < 2.5 MΩ, 2.5 MΩ to 50 GΩ, 50 GΩ to 500 GΩ, > 500 GΩ.
  Accuracy (± reading): Unspecified, 5%, 20%, Unspecified.
5000 V.
  Range: < 5 MΩ, 5 MΩ to 100 GΩ, 100 GΩ to 1 TΩ, > 1 TΩ.
  Accuracy (± reading): Unspecified, 5%, 20%, Unspecified.

Additional Specifications.
Bar graph range: 0 to 1 TΩ (1550C) - 0 to 2 TΩ (1555).
Insulation test voltage accuracy: -0%, +10% at 1 mA load current.
Induced AC mains current rejection: 2 mA maximum.
Charging rate for capacitive load: 5 seconds per μF.
Discharge rate for capacitive load: 1.5 s/μF.
Leakage current measurement.
  Range: 1 nA to 2 mA.
  Accuracy: ± (5% + 2 nA).
Capacitance measurement.
  Range: 0.01 μF to 15.00 μF.
  Accuracy: ± (15% rdg + 0.03 μF).
Timer.
  Range: 0 to 99 minutes.
  Resolution setting: 1 minute.
  Resolution indication: 1 second.
Live circuit warning.
  Warning range: 30 V to 660 V AC/DC, 50/60 Hz.
  Voltage accuracy: ± (15% + 2 V).



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your FLUKE 1550C REPAIR and/or FLUKE 1550C 5 kV Insulation Tester CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: