ROHDE & SCHWARZ FSC3.03 CALIBRATION and ROHDE & SCHWARZ FSC3.03 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ FSC3.03 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ROHDE & SCHWARZ FSC3.03 (1314.3006.03)   Description / Specification:   Spec Sheet 
ROHDE & SCHWARZ FSC3.03 3 GHz Spectrum Analyzer

The R&S FSC3.03 (1314.3006.03) 3 GHz Spectrum Analyzer is a compact, cost-efficient solution that offers all essential features of a professional spectrum analyzer with Rohde & Schwarz quality. It covers a wide range of applications from simple development tasks to production, or can be used for training RF professionals. Moreover, it is ideal for applications in service or maintenance. An optional preamplifier that is available for all models increases sensitivity for measuring weak signals. It features; Noise marker for determining the noise power referenced to 1 Hz measurement bandwidth. Frequency counter with 0.1 Hz resolution. Limit line monitoring (pass/fail function) for indicating whether the DUT complies with defined limits. Modulation depth measurement of AM-modulated signals. Measurement of harmonics and total harmonic distortion. AM/FM audio demodulator (audio via built-in loudspeaker or via headphones). Location of EMC problems on printed boards using the R&S®HZ-15 near-field probe set for emission measurements from 30 MHz to 3 GHz. Channel power measurement in a definable transmission channel with predefined settings for 3GPP WCDMA, cdmaOne, CDMA2000® and LTE mobile communications standards. All functions of the R&S FSC can be controlled via the USB or LAN interface using SCPI-compatible remote-control commands. Specifications. Frequency range: 9 kHz to 3 GHz. Resolution bandwidth: 10 Hz to 3 MHz. Displayed average noise level without preamplifier, RBW = 1 Hz: < –141 dBm, typ. –146 dBm (10 MHz to 2 GHz), < –138 dBm, typ. –143 dBm (2 GHz to 3 GHz). IP3 frequency 1 GHz: typ. 15 dBm. Phase noise frequency 500 MHz: < –95 dBc (1 Hz) (30 kHz carrier offset), < –100 dBc (1 Hz) (100 kHz carrier offset), < –120 dBc (1 Hz) (1 MHz carrier offset). Detectors: sample, max/min peak, auto peak, RMS. Level measurement uncertainty: < 1 dB, typ. 0.5 dB (10 MHz < f <= 3.0 GHz). Display: 5.7" (14.5 cm) color LCD with VGA resolution. Option. 1314.3535.02 - Preamplifier, 100 kHz to 3 GHz.



 

Standard Calibration $730.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ FSC3.03. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

Please contact us for your ROHDE & SCHWARZ FSC3.03 CALIBRATION and/or ROHDE & SCHWARZ FSC3.03 3 GHz Spectrum Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: