ROHDE & SCHWARZ NRP-Z11 CALIBRATION and ROHDE & SCHWARZ NRP-Z11 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ NRP-Z11 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Sensor?
Shop for Comparable Products on our  used RF Power Sensor page

 
   ROHDE & SCHWARZ NRP-Z11   Description / Specification:    
ROHDE & SCHWARZ NRP-Z11 8 GHz Three-path Universal Diode Power Sensor

The R&S NRP-Z11 8 GHz three-path diode universal power sensor is suitable for numerous applications because it supports continuous average, burst average, timeslot average, gate average and trace measurements. Featuring outstanding performance and high measurement speed and accuracy, the sensors can be used to perform precise average power measurements on modern wireless standard signals such as LTE, 3GPP, GSM, WiMAX™ and WLAN. For detailed analysis of GSM signals, for example, the sensors offer additional measurement functions such as the timeslot mode and trace mode with a video bandwidth of 100 kHz. Specifications. Frequency range: 10 MHz to 18 GHz. Power range: 200 pW to 200 mW (–67 dBm to +23 dBm). Maximum average power: 400 mW. Peak envelope power: 1 W (PK, 10 µs). Connector type: N. Impedance matching (SWR): 10 MHz to 2.4 GHz < 1.13, > 2.4 GHz to 8.0 GHz < 1.20. Rise time Video BW: < 8 µs > 50 kHz. Zero offset (typ.): 64 pW. Noise (typ.): 40 pW. Uncertainty for power measurements at +20 °C to +25 °C: 0.047 dB to 0.083 dB (absolute), 0.022 dB to 0.066 dB (relative). Model .04 has a reduced length of connecting cable (0.4 m).



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ NRP-Z11. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Standing Wave Ratio (SWR)
Standing wave ratio (SWR) is the ratio of the amplitude of a partial standing wave at an antinode (maximum) to the amplitude at an adjacent node (minimum).

Please contact us for your ROHDE & SCHWARZ NRP-Z11 CALIBRATION and/or ROHDE & SCHWARZ NRP-Z11 8 GHz Three-path Universal Diode Power Sensor REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: