CHROMA 63103 CALIBRATION and CHROMA 63103 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the CHROMA 63103 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Electronic Load?
Shop for Comparable Products on our  used Electronic Load page

 
   CHROMA 63103   Description / Specification:   Spec Sheet 
CHROMA 63103 60A 80V 300W Programmable Electronic Load

The Chroma 63103 80V 60A Programmable Electronic Load integrates microprocessing capability into each load module and mainframe as the system operates in parallel processing mode to optimize the speed and control among multiple load modules. It is configured to work synchronously, and testing can be carried out simultaneously at multiple output to simulate real life application. The 63103 load module operates in constant current, constant resistance, or constant voltage to satisfy a wide range of test requirements. It uses photo coupler for isolation between the output and control sections, thus each load is isolated and floating. The user can use multiple load modules independently to test multi-output power supplies, or parallel them in high power testing application. Specifications. Power: 300 W. Current: 0 to 60 A. Voltage: 1 to 80 V. Min. Operation Voltage (DC): 1.0 V at 60 A. Constant Current Mode (CCM) Range: 0~60A. CCM Resolution: 15 mA. CCM Accuracy: 0.1% + 0.2% F.S. Constant Resistance Mode (CRM) Range: 0.025 ohm~100 ohm (300W/16V), 1.25 ohm~5 kohm (300W/80V). CRM Resolution: 12 bits. CRM Accuracy: 0.1 ohm + 0.2% (100 ohm), 0.01 ohm + 0.1% (5 kohm). Constant Voltage Mode (CVM) Range: 1~80V. CVM Resolution: 20 mV. CVM Accuracy: 0.05% ± 0.1% F.S.



 

Standard Calibration $285.00 *
*This is a Web introductory price for one calibration of the CHROMA 63103. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your CHROMA 63103 CALIBRATION and/or CHROMA 63103 60A 80V 300W Programmable Electronic Load REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: