ROHDE & SCHWARZ FSVR13 CALIBRATION and ROHDE & SCHWARZ FSVR13 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ FSVR13 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ROHDE & SCHWARZ FSVR13 (1311.0006.13)   Description / Specification:   Spec Sheet 
ROHDE & SCHWARZ FSVR13 13.6 GHz Real-Time Spectrum Analyzer

The R&S FSVR13 13.6 GHz Real-Time Spectrum Analyzer combines a full-featured signal and spectrum analyzer with a real-time spectrum analyzer. In real-time mode, the R&S FSVR13 measures the signal spectrum with a bandwidth of up to 40 MHz around the set center frequency. The data for calculating and displaying the spectrum is recorded without gaps. In order to provide spectrum measurements that are true to the original, especially in the case of pulsed signals, the FSVR13 overlaps the data segments for transformation into the frequency domain by at least 80%. Specifications. Frequency range: 10 Hz to 13.6 GHz. Real-time RF bandwidth: 100 Hz to 40 MHz. A/D converter: 128 Msample/s, 16 bit. Measurement points per trace: 801. Marker resolution: 1 Hz. Resolution bandwidths: 1 Hz to 10 MHz (standard filter), 1 Hz to 10 MHz, 20 MHz, 40 MHz (standard filter, ZERO SPAN), 1 Hz to 300 kHz (FFT sweep), 100 Hz to 5 MHz (channel filter). Displayed average noise level 1 GHz: –152 dBm (1 Hz). Display range: displayed noise floor up to +30 dBm. CW RF power RF attenuation 0 dB RF preamplifier = off: 20 dBm (= 0.1 W). Options. FSV-B3, Audio Demodulator. FSV-B4, OCXO Reference Frequency. FSV-B5, Additional Interfaces, IF out, video out, AUX port, trigger out, 2 × USB. FSV-B17, Digital Baseband Interface. FSVR-B18, Solid State Drive (removable hard drive). FSVR-B19, Spare Hard Drive (removable hard drive). FSV-B21, LO/IF Ports for External Mixers. FSV-B24, RF Preamplifier. FSV-B25, Electronic Attenuator, 1 dB steps.



 

Standard Calibration $665.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ FSVR13. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

Please contact us for your ROHDE & SCHWARZ FSVR13 CALIBRATION and/or ROHDE & SCHWARZ FSVR13 13.6 GHz Real-Time Spectrum Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: