ROHDE & SCHWARZ FSVR30 CALIBRATION and ROHDE & SCHWARZ FSVR30 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ROHDE & SCHWARZ FSVR30 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ROHDE & SCHWARZ FSVR30 (1311.0006.30)   Description / Specification:   Spec Sheet 
ROHDE & SCHWARZ FSVR30 30 GHz Real-Time Spectrum Analyzer

The R&S FSVR30 30 GHz Real-Time Spectrum Analyzer combines a full-featured signal and spectrum analyzer with a real-time spectrum analyzer. In real-time mode, the R&S FSVR30 measures the signal spectrum with a bandwidth of up to 40 MHz around the set center frequency. The data for calculating and displaying the spectrum is recorded without gaps. In order to provide spectrum measurements that are true to the original, especially in the case of pulsed signals, the FSVR30 overlaps the data segments for transformation into the frequency domain by at least 80%. Specifications. Frequency range: 10 Hz to 30 GHz. Real-time RF bandwidth: 100 Hz to 40 MHz. A/D converter: 128 Msample/s, 16 bit. Measurement points per trace: 801. Marker resolution: 1 Hz. Resolution bandwidths: 1 Hz to 10 MHz (standard filter), 1 Hz to 10 MHz, 20 MHz, 40 MHz (standard filter, ZERO SPAN), 1 Hz to 300 kHz (FFT sweep), 100 Hz to 5 MHz (channel filter). Displayed average noise level 1 GHz: –152 dBm (1 Hz). Display range: displayed noise floor up to +30 dBm. CW RF power RF attenuation 0 dB RF preamplifier = off: 20 dBm (= 0.1 W). Options. FSV-B3, Audio Demodulator. FSV-B4, OCXO Reference Frequency. FSV-B5, Additional Interfaces, IF out, video out, AUX port, trigger out, 2 × USB. FSV-B17, Digital Baseband Interface. FSVR-B18, Solid State Drive (removable hard drive). FSVR-B19, Spare Hard Drive (removable hard drive). FSV-B21, LO/IF Ports for External Mixers. FSV-B24, RF Preamplifier. FSV-B25, Electronic Attenuator, 1 dB steps.



 

Standard Calibration $700.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ROHDE & SCHWARZ FSVR30. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your ROHDE & SCHWARZ FSVR30 CALIBRATION and/or ROHDE & SCHWARZ FSVR30 30 GHz Real-Time Spectrum Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: