SPIRENT GSS6100 CALIBRATION and SPIRENT GSS6100 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the SPIRENT GSS6100 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Communication Analyzer?
Shop for Comparable Products on our  used Communication Analyzer page or new Communication Analyzer page

 
   SPIRENT GSS6100   Description / Specification:   Spec Sheet 
SPIRENT GSS6100 GPS L1 Production Test System

The Spirent GSS6100 is designed specifically for high volume manufacturing test applications for devices that include a GPS L1 C/A code receiver. It has user control over test parameters including power level, Doppler, PRN, GPS time and data message. Specifications. Output Frequency Nominal carrier: 1575.42 MHz. Output Frequency Doppler range: ± 15,000 m/s. Output Frequency Relative frequency: ± 78.8 kHz. Output Frequency Stability: < ±1x10^-9 /day. Signal Level Nominal: -130dBm (front panel), -70dBm (rear panel). Signal Level Range: ± 20 dB. Signal Level Resolution: 0.1 dB. Signal Level Accuracy: ± 1 dB RSS. Signal Quality Spurious(in GPS band): < -30 dBc. Signal Quality Carrier Phase Noise: < 0.1 rad RMS. Signal Flexibility Ranging Code: PRN 1-37 GPS, PRN 120-138 SBAS, All G1/G2 codes, On/off. Signal Flexibility Data message: 50 bps for GPS, 250bps SBAS, 500sps SBAS FEC, User definable content.



 

Standard Calibration $700.00 *
*This is a Web introductory price for one calibration of the SPIRENT GSS6100. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Data Rate
Data Rate is the maximum number of bits of information which can be transmitted per second, as in a data transmission link. Typically expressed as megabits per second (Mbps).

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

SONET
Synchronous Optical NETwork (SONET) is a fiber-optic transmission system for high-speed digital traffic. Employed by telephone companies and common carriers, speeds range from 51 Mbps to 40 Gbps. SONET is an intelligent system that provides advanced network management and a standard optical interface. Specified in the Broadband ISDN (B-ISDN) standard, SONET backbones are widely used to aggregate T1 and T3 lines. The European counterpart to SONET is the Synchronous Digital Hierarchy, and the term "SONET/SDH" is widely used when referring to SONET

Please contact us for your SPIRENT GSS6100 CALIBRATION and/or SPIRENT GSS6100 GPS L1 Production Test System REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: