NEW LUXAR TECH LTC5060 SALES and LUXAR TECH LTC5060 CALIBRATION

 
Custom-Cal has for sale a new LUXAR TECH LTC5060. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the LUXAR TECH LTC5060. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another LAN-WAN Network Tester? Shop for Comparable Products on our   new LAN-WAN Network Tester page

 
List Price for a new LUXAR TECH LTC5060, $18,000.00   LUXAR TECH LTC5060   Description / Specification:    
LUXAR TECH LTC5060 Semiconductor Optical Amplifier (SOA)

The Luxar LTC5060 semiconductor optical amplifier (SOA) is designed for O-band optical signal amplification. Its high-density design (up to 8 SOA channels in 1RU) makes it suitable for 100G optical links up to 40 km by using small form factor 100G TRx modules that usually only support up to 10 km. Web based user interface for operation management and monitoring. Network management supported via both ethernet and serial port. Redundant AC or DC power supply. Specifications. Number of SOA Channels: 2/4/6/8. Operating Wavelength: 1280 to 1320 nm. Input Power: -23 to 0 dBm. Noise Figure: 6 dB (typical).



 

Standard Calibration $625.00 *
*This is a Web introductory price for one calibration of the LUXAR TECH LTC5060. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Data Rate
Data Rate is the maximum number of bits of information which can be transmitted per second, as in a data transmission link. Typically expressed as megabits per second (Mbps).

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

SONET
Synchronous Optical NETwork (SONET) is a fiber-optic transmission system for high-speed digital traffic. Employed by telephone companies and common carriers, speeds range from 51 Mbps to 40 Gbps. SONET is an intelligent system that provides advanced network management and a standard optical interface. Specified in the Broadband ISDN (B-ISDN) standard, SONET backbones are widely used to aggregate T1 and T3 lines. The European counterpart to SONET is the Synchronous Digital Hierarchy, and the term "SONET/SDH" is widely used when referring to SONET


Please contact us for your new LUXAR TECH LTC5060 sale price and/or LUXAR TECH LTC5060 CALIBRATION

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: