GIGATRONICS 80310A CALIBRATION and GIGATRONICS 80310A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the GIGATRONICS 80310A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Power Sensor?
Shop for Comparable Products on our  used RF Power Sensor page

 
   GIGATRONICS 80310A   Description / Specification:    
GIGATRONICS 80310A 18 GHz, Type K(m), Low VSWR CW Power Sensor

The Giga-tronics 80310A Low VSWR CW Power Sensor lets you measure CW power from 10 MHz to 18 GHz at more than 1,750 readings per second over GPIB. Measure up to 90 dB with a single sensor. Measurement Capabilities.
Specifications.
Frequency Range: 10 MHz to 18 GHz.
Power Range CW: -64 to +26 dBm.
Maximum Power: +29 dBM, 800 mW.
Power Linearity (Frequency > 8 GHz):
  -64 to -14 dBm: ±0.00 dB,
  -14 to +26 dBm: ±0.05 dB/10 dB.
VSWR:
  1.13: 0.01 - 2 GHz,
  1.16: 2 - 12 GHz,
  1.23: 12 - 18 GHz.
RF Connector: Type K(m) 50 Ω.



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the GIGATRONICS 80310A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your GIGATRONICS 80310A CALIBRATION and/or GIGATRONICS 80310A 18 GHz, Type K(m), Low VSWR CW Power Sensor REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: