ANRITSU MS2760A-0032 CALIBRATION and ANRITSU MS2760A-0032 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS2760A-0032 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ANRITSU MS2760A-0032   Description / Specification:    
ANRITSU MS2760A-0032 32 GHz Spectrum Master USB Handheld Spectrum Analyzer

The Anritsu MS2760A-0032 Handheld USB Spectrum Master spectrum analyzer provides continuous coverage from 9 kHz to 32 GHz, positioning it perfectly for growing millimeter-wave applications like 5G, 802.11ad, satellite communications, automotive radar, and more. The MS2760A is USB-powered and controlled from a Windows-based PC, laptop, or tablet, making it uniquely flexible for use in the lab, on the manufacturing floor, or in the field.
Specifications.

Frequency.
Frequency Range: 9 kHz to 32 GHz.
Tuning Resolution: 1 Hz.
Internal 10 MHz Frequency Reference Aging: ±1.0 ppm/year
Internal 10 MHz Frequency Reference Accuracy: ±0.2 ppm (25 °C ± 25 °C) + aging.
Frequency Span: 10 Hz to 32 GHz.

Bandwidth
Resolution Bandwidth (RBW): 1 Hz to 3 MHz.
Video Bandwidth (VBW): 1 Hz to 3 MHz.
VBW/Average Type: Linear / Log.
RBW Filters: Flat Top, Nuttall.

Amplitude Ranges
Dynamic Range: > 103 dB typical at 70 GHz, 2/3 (TOI - DANL) in 1 Hz RBW.
Display Range: 1 dB to 15 dB/div in 1 dB steps, ten divisions displayed.
Reference Level Range: -120 dBm to +30 dBm.
Maximum Safe Level Input: +30 dBm CW, ±10 VDC.

Phase Noise (dBc/Hz, 20 °C to 30 °C): -116 dBc/Hz @ 10 kHz offset at 1 GHz.
Residual Spurs: -85 dBm (maximum), -95 dB (typical).
Amplitude Accuracy: ±1.8 dB (maximum), ±0.5 dB (typical).
Displayed Average Noise Level (DANL) maximum (RMS detection, VBW/Avg type = Log, IF Gain On):
   10 MHz to 644 MHz, -131 dBm;
   > 644 MHz to 4 GHz, -136 dBm;
   > 4 GHz to 32 GHz, -131 dBm.
RF In: K Connector (2.92 mm), male 50 Ω.



 

Standard Calibration $1,310.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MS2760A-0032. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

Please contact us for your ANRITSU MS2760A-0032 CALIBRATION and/or ANRITSU MS2760A-0032 32 GHz Spectrum Master USB Handheld Spectrum Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: