NEW TRANSMILLE EA002 SALES and TRANSMILLE EA002 CALIBRATION
 
Custom-Cal has for sale a new TRANSMILLE EA002. Also, short calibration turn times minimize downtime and reasonable rates decrease your long-term cost of ownership and minimizes downtime of the TRANSMILLE EA002. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Calibration Standard? Shop for Comparable Products on our   new Calibration Standard page

 
List Price for a new TRANSMILLE EA002, $1,372.00   TRANSMILLE EA002   Description / Specification:    
TRANSMILLE EA002 Clamp Coil Adapter

The Transmille EA002 Clamp Coil Adapter is designed for the calibration of both wound (AC only) & Magnetic field (hall effect) AC/DC clamp meters the current coil offers several unique features built in a robust construction. The coil is designed to immerse both jaws of the clamp meter in the magnetic field while allowing the ‘gap’ or opening where magnetic flux will escape to protrude through the coil and stay out of the strongest part of the field. This makes the reading less dependent on the position of the clamp within the coil and also the quality of the jaw closing, allowing greater confidence in the calibration.
Specifications.

Connection to Calibrator: Via supplied 4mm to 4mm connection leads (x2) to 3000 series current terminals.
Coil Configuration: 2 Turn (LHS), 10 Turn (RHS), 50 Turn (CENTRE).
Coil Type: High accuracy balanced configuration.
Min. internal jaw dimensions: 10mm (2 Turn & 10 Turn), 25mm (50 Turn).
Maximum Current: 30A.
Maximum RMS voltage: 4V.
Frequency Range: DC to 500Hz.

2 Turn Coil Accuracy (Input 0 to 30A : Freq. DC - 30Hz to 60Hz : Effective Output 0 to 60A).
Effective accuracy - Coil only (wound clamps, 90 Day Rel.) 0.35% + 0.008A.
Effective accuracy - Coil only (hall effect clamps, 90 Day Rel.) 0.48% + 0.07A.

10 Turn Coil Accuracy (Input 0 to 30A : Freq. DC - 30Hz to 60Hz : Effective Output 0 to 300A).
Effective accuracy - Coil only (wound clamps, 90 Day Rel.) 0.41% + 0.01A.
Effective accuracy - Coil only (hall effect clamps, 90 Day Rel.) 0.59% + 0.11A.

50 Turn Coil Accuracy (Input 0 to 30A : Freq. DC - 30Hz to 60Hz : Effective Output 0 to 1500A).
Effective accuracy - Coil only (wound clamps, 90 Day Rel.) 0.24% + 0.04A.
Effective accuracy - Coil only (hall effect clamps, 90 Day Rel.) 0.45% + 0.42A.



 

Standard Calibration $865.00 *
*This is a Web introductory price for one calibration of the TRANSMILLE EA002. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Clipping
Clipping is the limiting of a signal so that it never exceeds some threshold.

Line Regulation
Line regulation is the capability to maintain a constant output voltage level on the output channel of a power supply despite changes to the input voltage level.

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

RMS
RMS or root mean square is a statistical measure of the magnitude of a varying quantity

Please contact us for your new TRANSMILLE EA002 sale price and/or TRANSMILLE EA002 CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: