3Z TELECOM 3Z RFV-2000 REPAIR and 3Z TELECOM 3Z RFV-2000 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the 3Z TELECOM 3Z RFV-2000. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the 3Z TELECOM 3Z RFV-2000 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Component?
Shop for Comparable Products on our  used RF Component page or new RF Component page

 
   3Z TELECOM 3Z RFV-2000   Description / Specification:    
3Z TELECOM 3Z RFV-2000 RF Vision Antenna Alignment Tool

The 3Z Telecom 3Z-RFV-2000 Antenna Alignment Tool incorporates GPS Technology provides a visual guide to show where the antenna is pointing. The RF Vision’s augmented reality displays a bullseye target in the 5-inch
LCD touch screen display. Now the tower tech can perfectly align the antenna by simply moving the crosshair over to align the bullseye in one easy step. The touch screen display is responsive to touch in most work gloves, letting you keep your hands protected and warm in cold conditions. Dual frequency technology allows RF Vision to measure each satellite twice, seeing a total of 174 satellites signals. RF Vision will create a single comprehensive PDF or CSV report for each site being aligned. Retrieve reports easily via the built-in micro-USB port. Specifications.

Dimensions.
Length: 13.3" (338 mm).
Width: 5.6" (141 mm).
Height: 4.6" (118 mm).
Weight: 4.2 lbs (1.90 kg).

Accuracy
Azimuth/Heading: 0.5° RMS.
Tilt: +/- 0.1° (Typical).
Roll: +/- 01° (Typical).
Horizontal Position SBAS (WAAS): 0.82 ft. (0.25m) RMS.
Height: 0.04" (1mm) Typical with 3ZRFA-LRF Laser Rangefinder.



 

Standard Calibration $560.00 *
*This is a Web introductory price for one calibration of the 3Z TELECOM 3Z RFV-2000. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Please contact us for your 3Z TELECOM 3Z RFV-2000 REPAIR and/or 3Z TELECOM 3Z RFV-2000 RF Vision Antenna Alignment Tool CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: