ILX LIGHTWAVE OMH-6742B CALIBRATION and ILX LIGHTWAVE OMH-6742B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE OMH-6742B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Sensor?
Shop for Comparable Products on our  used Optical Power Sensor page or new Optical Power Sensor page

 
   ILX LIGHTWAVE OMH-6742B   Description / Specification:    
ILX LIGHTWAVE OMH-6742B 350 to 1100 nm Silicon Optical Power/Wavelength Head

The ILX OMH-6742B Silicon Power/WaveHead, when coupled to an OMM-6810B Optical Meter, provides the capability to accurately measure the power and wavelength of laser sources between 350 and 1100 nm. Easy mounting, quick setup and alignment, and a two meter cable make the ILX Lightwave Optical
Measurement Head easy to integrate into an experiment.
Specifications.


Power Measurement.
Range: 100 nW ~ 1 W; -40 dBm ~ +30 dBm.
Accuracy: ±3.5% (440 to 1000 nm).

Wavelength Measurement.
Range: 350 to 1100 nm.
Accuracy: ±1.0 nm.
Temperature Coefficient: <±0.03 nm / °C.
Linearity with Power Change: <±0.5 nm.

Sampling Rate:
  Slow 16 samples @ 60 ms / sample,
  Medium 4 samples @ 60 ms / sample,
  Fast 1 sample @ 60 ms / sample.
Input Bandwidth:
  Slow 1 Hz,
  Medium 10 Hz,
  Fast 60 Hz.



 

Standard Calibration $405.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ILX LIGHTWAVE OMH-6742B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Amplified Spontaneous Emission Source (ASE)
ASE, a process where spontaneously emitted radiation (luminescence) is amplified. In lasers and particularly in high-gain erbium-doped amplifiers, amplified spontaneous emission is usually an unwanted effect. It tends to limit the gain achievable in a single stage of a fiber optic amplifier to the order of 40–50 dB.

Dynamic Range
In a transmission system, the ratio of the overload level to the noise level of the system, usually expressed in dB. Ratio of the highest to lowest detectable signal of a system, expressed in dB.

Optical Power
Optical Power is usually measured in "dBm", or decibels referenced to one miliwatt of power. while loss is a relative reading, optical power is an absolute measurement, referenced to standards. You measure absolute power to test transmitters or receivers and relative power to test loss.

Relative Wavelength Accuracy
When randomly changing the wavelength and measuring the differences between the actual and displayed wavelengths, the relative wavelength accuracy is ± half the span between the maximum and the minimum value of all differences.

Wavelength
Wavelength is a term for the color of light, usually expressed in nanometers (nm) or microns (m). In Fiber Optics the wavelenghts mostly used are in the infrared region where the light is invisible to the human eye.

Please contact us for your ILX LIGHTWAVE OMH-6742B CALIBRATION and/or ILX LIGHTWAVE OMH-6742B 350 to 1100 nm Silicon Optical Power/Wavelength Head REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: