3Z TELECOM 3ZRFA1000 REPAIR and 3Z TELECOM 3ZRFA1000 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the 3Z TELECOM 3ZRFA1000. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the 3Z TELECOM 3ZRFA1000 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   3Z TELECOM 3ZRFA1000   Description / Specification:    
3Z TELECOM 3ZRFA1000 GPS Antenna Alignment Tool

The 3Z Telecom 3ZRFA1000 Antenna Alignment Tool incorporates GPS Technology to calculate precise Azimuth, Tilt, Roll, and AGL measurements for a multitude of directional antenna systems. All measurements taken by the 3ZRFA1000 are True North according to earth’s axis, not magnetic north. Our universal antenna mounting system is used for quick antenna attachment and release. It can easily be transported up any tower. Save all your field measurements for recordkeeping and reporting, easily accessible over USB.
Specifications.

Dimensions.
Length: 18.75" 147.6 cm).
Width: 5.375" (13.6 cm).
Height: 4.5" (11.43 cm).
Weight: 3.675 lbs (1.66 kg).

Accuracy
Heading: <0.75° RMS.
Tilt/Roll: <0.5° RMS.
Position: <1m RMS.
Altitude/Height: <2m RMS.



 

Standard Calibration $560.00 *
*This is a Web introductory price for one calibration of the 3Z TELECOM 3ZRFA1000. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Multimode Fiber
Multimode Fiber has a large core (almost always 62.5 microns - a micron is one one millionth of a meter - but sometimes 50 microns) and is used with LED sources at wavelengths of 850 and 1300 nm for short distance, lower speed networks like LANs. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

SDH
Synchronous Digital Hierarchy (SDH) is an international digital telecommunications network hierarchy which standardises transmission around the bit rate of 51.84 megabits per second, which is also called STS-1. Multiples of this bit rate comprise higher bit rate streams. Thus STS-3 is 3 times STS-1, STS-12 is 12 times STS-1, and so on. STS-3 is the lowest bit rate expected to carry ATM traffic, and is also referred to as STM-1 (Synchronous Transport Module-Level 1). The SDH specifies how payload data is framed and transported synchronously across optical fibre transmission links without requiring all the links and nodes to have the same synchronized clock for data transmission and recovery.

Please contact us for your 3Z TELECOM 3ZRFA1000 REPAIR and/or 3Z TELECOM 3ZRFA1000 GPS Antenna Alignment Tool CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: