FLUKE 5522A CALIBRATION and FLUKE 5522A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 5522A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Calibrator?
Shop for Comparable Products on our  used Calibrator page

 
   FLUKE 5522A   Description / Specification:    
FLUKE 5522A Multi-Product Calibrator

The Fluke 5522A Multi-Product Calibrator addresses a wide calibration workload and comes with internal and external protection features that protect it against damage and make it easier to transport for on-site or mobile calibration. It can also be fully automated with MET/CAL® Plus Calibration Management Software. The 5522A is the ideal calibrator for metrology professionals who need to calibrate many different types of electronic equipment and want a transportable instrument that offers them a high return on investment.
The Fluke 5522A sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current to simulate dc and ac power with phase control, resistance, capacitance, thermocouples and RTDs. It can also measure thermocouple temperature and pressure using one of 29 Fluke 700 Series pressure modules.
Specifications.

Direct volts: 0 to ± 1020 V.
Direct current: 0 to 20.5 A.
Alternating volts: 1 mV to 1020 V, 10 Hz to 500 kHz.
Volt/Hertz: 1000 V@ 10 kHz/330 V@100 kHz.
Alternating current: 29 μA to 20.5 A, 10 Hz to 30 kHz.
Waveforms: Sine, square, triangle, truncated sine.
Resistance: 0 Ω to 1100 MΩ.
Capacitance: 220 pF to 110 mF.
Power (phantom loads): 20.9 kW.
Phase control: 0.01°.
Thermocouple (source and measure temperature): B, C, E, J, K, L, N, R, S, T, U; 10 μV/°C and 1 mV/°C.
RTD (source temperature):
  Pt 385-100 Ω, Pt 3926-100 Ω, Pt 3916-100 Ω,
  Pt 385-200 Ω, Pt 385-500 Ω, Pt385 1000 Ω,
  PtNi 385-120 Ω, (Ni120), Cu 427 10 Ω.
Frequency uncertainty: <2.5 ppm.



 

Standard Cal with Data $1,800.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE 5522A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your FLUKE 5522A CALIBRATION and/or FLUKE 5522A Multi-Product Calibrator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: