FLUKE I2000 CALIBRATION and FLUKE I2000 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE I2000 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   FLUKE I2000   Description / Specification:    
FLUKE I2000 2000 Amp AC Current Probe

The Fluke i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers. It has three ranges: 20A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, and is ideal for current measurement on thick and hard to reach conductors without breaking the circuit. The i2000 features a CAT III 600 V safety rating.
Specifications.

Maximum conductor diameter: 178 mm.
Current ranges: 20 A, 200 A, 2000 A, AC rms.
Output sensitivity (AC-coupled): 1 mV, 10 mV, 100 mV, 1 mV per A.
Load impedance: 100 kΩ minimum.
Accuracy (at +25°C): ±1% of range (45 Hz to 65 Hz).
Linearity (10% to 100% of range): ±0.2% of reading.
Noise: 8 mV AC rms (30 A) ; 2 mV AC rms (300 A, 3000 A).
Frequency range: 10 Hz to 20 kHz (-3 dB).
Phase error: < ±1° (45 Hz to 65 Hz) ; ±10° (at 20 kHz).
Position sensitivity (with cable > 25 mm from the coupling): From 1% up to 3% of range with cable, depending on distance from the center (see figure left). Measurements closer than 25 mm from the coupling are typically greater than 3% of range.
External wire influence: 1% (-40 db) of external current >200 mm from head.
External field: (with cable > 200 mm from the head) ±1% of range.
Temperature Coefficient: ±0.08% of reading per °C.
Working voltage: 600 V AC rms or DC.



 

Standard Calibration $260.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the FLUKE I2000. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).

Please contact us for your FLUKE I2000 CALIBRATION and/or FLUKE I2000 2000 Amp AC Current Probe REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: