AMPROBE ACD-9A CALIBRATION and AMPROBE ACD-9A REPAIR

 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the AMPROBE ACD-9A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   AMPROBE ACD-9A   Description / Specification:    
AMPROBE ACD-9A 1000 Amp LCD Digital Clamp-on Meter

The Amprobe ACD-9A 1000 Amp LCD digital clamp-on will measure AC current, AC voltage, DC voltage and resistance. It will provide a digital readout of the RMS value of the variable being measured. It can display peak inrush or surge currents. Specifications. AC Voltage Ranges: 0-199.9 / 999. AC Voltage Accuracy Based on Sinusoidal Waveform: ±2% of reading ±1 LSD. AC Current Ranges: 0-199.9 / 999 Cont. / 0-999 Peak. AC Current Accuracy Based on Sinusoidal Waveform: ±2% of reading ±2 LSD. DC Voltage Ranges: 0-199.9 / 999. DC Voltage Accuracy: ± 0.75% rdg ± 1 LSD. Resistance Range: 0-199.9 / 1999 ohm. Resistance Accuracy: ± 2% rdg ± 1 LSD. Operating Frequency: 40-400 Hz. Display: 0.4" LCD. Resolution: "0.1" on low range, "1" on high range. Sensing: Average. Case Voltage Breakdown Test: 3000 VAC. Input Impedance: 10 Megohms on voltage ranges. Sampling Rate: Minimum of 2 times/second. Response Time: 2.5 seconds maximum.



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the AMPROBE ACD-9A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Channel Bandwidth
Channel Bandwidth is the bandwidth over which power is measured. This is usually the bandwidth in which almost all of the power of a signal is contained.

Jitter
Jitter in technical terms is the deviation in or displacement of some aspect of the pulses in a high-frequency digital signal. Jitter is the time variation of a periodic signal in electronics and telecommunications, often in relation to a reference clock source. Jitter may be observed in characteristics such as the frequency of successive pulses, the signal amplitude, or phase of periodic signals. Jitter is a significant, and usually undesired, factor in the design of almost all communications links (e.g., USB, PCI-e, SATA, OC-48). In clock recovery applications it is called timing jitter.

Overshoot
Overshoot is the distortion that follows a major transition; the difference between the peak power point and the pulse-top amplitude computed as a percentage of the pulse-top amplitude.

Rise Time
Rise time refers to the time required for a signal to change from a specified low value to a specified high value, usually 10 and 90 percent of pulse-top amplitude (vertical display is linear power).


Please contact us for your AMPROBE ACD-9A CALIBRATION and/or AMPROBE ACD-9A 1000 Amp LCD Digital Clamp-on Meter REPAIR

I'm interested in: 
Calibration Type (Select one):


Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: