ANDO AQ-4137B CALIBRATION and ANDO AQ-4137B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANDO AQ-4137B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   ANDO AQ-4137B (AQ4137B)   Description / Specification:    
ANDO AQ-4137B Stabized Light Source

The Ando AQ-4137B Stabized Light Source can accommodate up to two channels. Both LED and LD light source units of various wavelengths are available to allow many configurations. Incorporation of a thermostat/ temperature compensation circuit ensures high optical output level stability. Since the output level can be attenuated up to 6dB in steps of 0.1dB, the AQ-4137B can be used for accurate characteristics measurements at the same optical output level, etc. Features. Plug-in-type unit allows a wide choice of light source units-both LED and LD-with various wavelengths(660, 850, 1300, 1310, 1550, 1310/1550 nm). Optical output level can be attenuated from 0 to 6dB continuously (in steps of 0.1dB). Capable of producing CW light and 270Hz chopped light. GPIB standard. Internal modulation frequency: Square wave 270Hz ± 0.5Hz



 

Standard Calibration $255.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANDO AQ-4137B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your ANDO AQ-4137B CALIBRATION and/or ANDO AQ-4137B Stabized Light Source REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: