ANDO AQ-4139(155) CALIBRATION and ANDO AQ-4139(155) REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANDO AQ-4139(155) Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   ANDO AQ-4139(155) (AQ4139(155))   Description / Specification:    
ANDO AQ-4139(155) LD Unit

The Ando AQ-4139(155) LD Plug-in is used with AQ-4137 Stabized Light Source. Specifications. Wavelength: 1550 ±30 nm. Spectral half value width: 10 nm or less. Output waveform: CW light, 270Hz chopped light (standard), 1kHz, 2kHz chopped light (option). Output level: -5 dBm. Output Level Stability against temperature: 0.3dB or less at connector output with 0.0 dB attenuation, using CW light. Output Level Stability against temperature: 1dB or less at output of a 2m-long Ando standard optical fiber, using CW light with 0.0 dB attenuation. Output Level Stability Short-term: 0.05 dB or less at output of a 2m-long Ando standard optical fiber, using CW light with 0.0 dB attenuation. External modulation: 300Hz to 100kHz (square wave), BNC connector. Optical connector: FC-PC (NTT specification): standard. Attenuation level range: Maximum 6dB (referenced to OdB point, in steps of 0.1dB).



 

Standard Calibration $220.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANDO AQ-4139(155). Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Isolation
The extent to which optical power from one signal path is prevented from reaching another signal path.

Polarization Extinction Ratio
Polarization Extinction Ratio is the ratio of optical power in the slow axis of the polarization maintaining fiber to optical power in the fast axis within a specified wavelength range.

Sidemode Suppression Ratio
Sidemode Suppression Ratio is the ratio of average signal power to the optical power of the highest sidemode within a distance from 0.1 to 6 GHz to the signal’s optical frequency, expressed in dB.

Wavelength Stability
Wavelength Stability is the change of wavelength during given time span, expressed as ± half the span between the maximum and the minimum of all actual wavelengths.

Please contact us for your ANDO AQ-4139(155) CALIBRATION and/or ANDO AQ-4139(155) LD Unit REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: