ANRITSU 68369B REPAIR and ANRITSU 68369B CALIBRATION

 
Custom-Cal has a high success rate in the repair of the ANRITSU 68369B. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU 68369B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our
 used Signal Generator page

 
   ANRITSU 68369B   Description / Specification:    
ANRITSU 68369B 40.0 GHz Synthesized Sweep/Signal Generator

The Anritsu 68369B 40.0 GHz Synthesized Sweep/Signal Generator features 10 MHz to 40 GHz analog, step, and manual sweep capability. Output levels to +17 dBm and optional 0.1 Hz resolution. It provides AM and FM via external modulating signals or internal arbitrary waveform generators. The internal generators offer 7 modulating waveforms, including Gaussian noise, as well as user-defined arbitrary waveforms. Pulse modulation parameters can be set externally or by the internal pulse generator. Doublet, triplet, or quadruplet pulses make RADAR blind spot testing easy. Simultaneous synchronized modulations let you set complex signal scenarios across the entire frequency range. Specifications. Frequency Range: 0.01 to 40 GHz. CW mode Output: Twenty independent, presettable CW frequencies (FO to F9 and MO to M9). CW mode Accuracy: Same as internal or external 10 MHz time base. CW mode Resolution: 1 kHz (0.1 Hz with Option 11). Phase-locked step sweep mode Sweep width: Independently selected, 1 kHz (0.1 Hz with Option 11) to full range, every frequency step in sweep range is phase-locked. Phase-locked step sweep mode Resolution (Min. step size): 1 kHz (0.1 Hz with Option 11). Spurious signals Harmonic and harmonic related: <-30 dBc (10 to 50 MHz), <-40 dBc ( >50 MHz to <= 2 GHz), <-60 dBc ( >2 GHz to <= 20 GHz), <-40 dBc (>20 GHz to 40 GHz). Output power: +13 dBm (>=0.01 to <2 GHz), +9 dBm (>= 2 to <= 20 GHz), +6 dBm (>20 GHz to 40 GHz). Options. Option 2B, Step attenuator. Option 6, Phase modulation capability (Not available with option 7). Option 7, Generators deletes the internal AM and FM generators (Not available in combination with Option 6, 8, 10 or 20). Option 8, Internal power meter (Not available with Option 7). Option 9, Rear panel RF output. Option 10, Complex modulation(Not available with option 7). Option 11, 0.1 Hz frequency resolution. Option 15, High power output. Option 16, High stability time base. Option 17, Delete front panel. Option 18, MM-wave bias. Option 19, SCPI programmability adds GPIB command mnemonics.



 

Standard Calibration $1,310.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU 68369B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.


Please contact us for your ANRITSU 68369B REPAIR and/or ANRITSU 68369B 40.0 GHz Synthesized Sweep/Signal Generator CALIBRATION

I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: