ANRITSU MG3692B CALIBRATION and ANRITSU MG3692B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MG3692B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Signal Generator?
Shop for Comparable Products on our  used Signal Generator page

 
   ANRITSU MG3692B   Description / Specification:    
ANRITSU MG3692B 20 GHz Synthesized Signal Generator

The Anritsu MG3692B 20 GHz Synthesized Signal Generator is microprocessor-based, synthesized signal source with high resolution phase-lock capability. It offers unsurpassed frequency coverage, leveled output power, spectral purity, switching speed, modulation performance, size, upgradeability, reliability, and service. The signal generator is configurable for a broad range of applications from R&D to manufacturing and depot repair. It generates both discrete CW frequencies and broad (full range) and narrow band step sweeps across the frequency range of 2 GHz to 20 GHz. Options are available to extend the low end of the frequency range to 0.1 Hz. All functions of the signal generator are fully controllable locally from the front panel or remotely (except for power on/standby) via the IEEE-488 General Purpose Interface Bus (GPIB). Specifications. Frequency Range: 2 to 20 GHz. Output Power (standard): <=10 GHz (+19.0 dBm), >10 to <= 20 GHz (+17.0 dBm). CW Mode Output: Twenty independent, presettable CW frequencies (F0 – F9 and M0 –M9). Accuracy: Same as internal or external 10 MHz time base. Resolution: 0.01 Hz. Phase-Locked Step Sweep Mode nWidth: Independently selected, 0.01 Hz to full range. Every frequency step in sweep range is phase-locked. Accuracy: Same as internal or external 10 MHz time base. Resolution (Minimum Step Size): 0.01 Hz. Markers: Up to 20 independent, settable markers (F0 – F9 and M0 – M9). Options. 2X - Mechanical Step Attenuator. 2E - Electronic Step Attenuator. 3 - Ultra Low Phase Noise, main band. 4 - 10 MHz to 2.2 GHz RF coverage, Ultra-Low Phase Noise version. 5 - 10 MHz to 2 GHz RF coverage. 6 - Analog Sweep Capability. 7 - IF Up-Conversion. 8 - Power Monitor. 9X - Rear Panel Output. 10 - User-Defined Modulation Waveform Software. 12 - Frequency and Phase Modulation. 14 - Amplitude Modulation. 15X - High Power. 16 - High Stability Time Base. 17 - Delete Front Panel. 18 - mmW Bias Output. 20 - Scan Modulation. 22 - 0.1 Hz to 10 MHz Audio coverage. 26X - Pulse Modulation. 27 - Internal LF and Pulse Generators. 28X - Analog Modulation Suite. 30 - Low Phase Noise. 37A - Performance Suite. 38A - Ultra Performance Suite. 39A,B,C,D - CW Power Meter and Sensor Bundle. 40 - Pulse Power Meter and Sensor Bundle.



 

Standard Calibration $1,135.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MG3692B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a component, link or network will operate.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Noise Figure
Noise Figure the ratio of the signal-to-noise power ratio at the input to the signal-to-noise power ratio at the output.

Ringing
Ringing is an unwanted oscillation of a voltage or current.

Please contact us for your ANRITSU MG3692B CALIBRATION and/or ANRITSU MG3692B 20 GHz Synthesized Signal Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: