ANRITSU MS2711A CALIBRATION and ANRITSU MS2711A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS2711A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ANRITSU MS2711A   Description / Specification:    
ANRITSU MS2711A 3 GHz Handheld RF Spectrum Analyzer

The Anritsu MS2711A is a synthesized-based hand held 3000 MHz spectrum analyzer that provides quick and accurate signal results. Measurements can be easily made by using the main instrument functions: frequency, span, amplitude and bandwidth. Dedicated keys for common functions and a familiar calculator type keypad are available for fast data entry. Automatic time and date stamping of measurement data of up to 200 results is provided as is storage and recall of up to 10 different measurement setups. A large, high-resolution liquid crystal display (LCD) provides easy viewing in a variety of lighting conditions. It is capable of up to two and one-half hours of continuous operation from a fully charged battery and can be operated from a 12.5 Vdc source (which will also simultaneously charge the battery). Specifications. Frequency Range: 100 kHz to 3.0 GHz. Frequency Reference Aging: ±1 ppm/yr. Frequency Reference Accuracy: ±2 ppm. Frequency Span: 100 kHz to 3 GHz in 1, 2, 5 step selections in auto mode, plus zero span. Sweep Time: >= 650 ms full span; 400 ms zero span. SSB Phase Noise: –75 dBc/Hz, 30 kHz offset @ 1 GHz. Resolution Bandwidth Selections: 10 kHz, 30 kHz, 100 kHz and 1 MHz. Video Bandwidth Selection: 100 Hz to 300 kHz in 1-3 sequence. Amplitude Measurement Range: +20 dBm to –97 dBm. Displayed Average Noise Level: <= –97 dBm (full span) typical. Dynamic Range: > 65 dB. Maximum Safe Input Level: +20 dBm, maximum measurable safe input. RF Input 50 ohm. RS232 Interface. Option 5 - Add RF Wattmeter Power Monitor (RF detector not included).



 

Standard Calibration $655.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MS2711A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBc
dBc (decibels relative to the carrier) is the power ratio of a signal to a carrier signal, expressed in decibels. If the dBc figure is positive, then the relative signal strength is greater than the carrier signal strength. If the dBc figure is negative, then the relative signal strength is less than carrier signal strength.

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Spurious Signals
Spurious signals are undesired signals. They can be considered in two classes. They can be stationary; their frequency and amplitude do not change significantly, or non-stationary, where the frequency and/or amplitude change significantly over short time periods.

Please contact us for your ANRITSU MS2711A CALIBRATION and/or ANRITSU MS2711A 3 GHz Handheld RF Spectrum Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: