ANRITSU MS2718B CALIBRATION and ANRITSU MS2718B REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU MS2718B Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another RF Spectrum Analyzer?
Shop for Comparable Products on our  used RF Spectrum Analyzer page or new RF Spectrum Analyzer page

 
   ANRITSU MS2718B   Description / Specification:    
ANRITSU MS2718B 13 GHz Microwave Spectrum Analyzer

The Anritsu MS2718B 9 kHz to 13 GHz, Synthesized Spectrum Analyzereasily handles most RF and microwave spectrum analyzer needs. A wide 10 MHz demodulation bandwidth supports optional GSM, CDMA, W-CDMA, W-CDMA/HSDPA, EVDO, WiMAX and TD-SCDMA measurements. 512 MB Storage for 4,000 Traces and 4,000 Setups. Standard Built-in Preamplifier. Specifications. Frequency Range: 9 kHz to 13.0 GHz. Preamplifier: 100 kHz to 4.0 GHz. Frequency Span: 10 Hz to full frequency range, plus 0 Hz (zero span). Tuning Resolution: 1 Hz. Amplitude accuracy at 50 MHz: ± 0.7 dB (20° C to 30° C). Attenuator Range: 0 to 65 dB. Attenuator Resolution: 5 dB steps. Measurement Range: DANL to +30 dBm. Display Range: 1 to 15 dB/div in 1 dB steps Ten divisions displayed. Resolution Bandwidth: (–3 dB) 1 Hz to 3 MHz in 1-3 sequence ±10%, 200 Hz, 9 kHz, 120 kHz when quasi-peak detector selected. Sweep Time Zero span: 10 us to 600s. Display: 8.4 inch Color TFT Display (SVGA). Options. 001 - Rack Mount. 007 - Secure Data Operation. 009 - RF and Demodulation Hardware. 017 - GPIB Interface. 019 - High Accuracy Power Meter Functionality. 089 - IF Output.



 

Standard Calibration $655.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU MS2718B. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related RF Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Available Gain
Available Gain is the ratio, at a specific frequency, of power available from the output to the power in from the source.

Frequency Span
Frequency Span specifies the range between the start and stop frequencies, also referred to as bandwidth

Peak Envelope Power
Peak envelope power is the maximum value of the envelope power. Envelope power is measured by making the averaging time much less than 1/fm where fm is the maximum frequency component of the modulation waveform. The averaging time is therefore limited on both ends: (1) it must be small compared to the period of the highest modulation frequency, and (2) it must be large enough to be many RF cycles long.

Please contact us for your ANRITSU MS2718B CALIBRATION and/or ANRITSU MS2718B 13 GHz Microwave Spectrum Analyzer REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: