ANRITSU S332D REPAIR and ANRITSU S332D CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ANRITSU S332D. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ANRITSU S332D Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Cellular Test Set? Shop for Comparable Products on our   new Cellular Test Set page

 
   ANRITSU S332D   Description / Specification:    
ANRITSU S332D 4.0 GHz Site Master Antenna, Cable and Spectrum Analyzer

The Anritsu S332D Site Master is a precision hand-held return loss/SWR, fault location and Spectrum analysis measurement instrument. OSL calibration can be applied to all 1-port measurements (RL/VSWR/cable Loss/DTF) enabling accurate vector corrected measurements. Built-in fault location, RF power monitor, bias tee, and spectrum analysis capabilities are available. Site Masters' SPA has dedicated routines for one-button measurements of field strength, channel power, occupied bandwidth, adjacent channel power ratio (ACPR), Carrier-to-Interference, and interference analysis. Light weight, rugged design, and wide temperature range make them ideal for field applications. The S332D Site Master’s proprietary design provides superior immunity to on-channel RF interference, which is important for live site testing. Features. Accurate return loss/SWR and fault location measurements. Accurately tests RF transmission lines and antennas. Superior immunity to on-channel interference for testing at co-located antenna sites. Specifications

Frequency range: 25 MHz to 4.0 GHz.
Frequency Resolution: 100 kHz.
Frequency Accuracy (CW Mode): ± 75 parts per million.
Display data points Selectable: 130, 259, 517.
Immunity to interfering RF signals: -5 dBm (On-frequency), +17 dBm (On-channel).
Return Loss Range: 0.0 to 60.00 dB, Resolution: 0.01 dB.
VSWR: Range 1 to 65.53, Resolution: 0.01 dB.
Cable loss: Range 0 to 30, Resolution: 0.01 dB.
Distance-To-Fault (DTF) Vertical Range: Return loss, 0 to 60 dB; SWR, 1 to 65.53.
DTF Horizontal range (meter): 0 to (# of data points -1) x horizontal resolution, where data points = 130, 259 or 517.
Maximum Input (Damage Level) +20 dBm.

Spectrum analysis
Frequency range: 1600 MHz.
Accuracy: ± 2 ppm.
Frequency span: 1 kHz to 1.6 GHz in 1, 2, 5 step selections in auto mode, plus zero span.
Resolution bandwidth: 10 kHz, 30 kHz, 100 kHz, 1 MHz.

Options
3: Color daylight viewable TFT display.
5: Power Monitor to measure power - external detector needed.
10A: Built-in bias tee.
21: 2-port scalar transmission measurements.
25: Interference Analyzer.
27: Channel Scanner.
29: Power Meter from 3 MHz to 3 GHz.
31: Built-in GPS receiver provides latitude, longitude, altitude information with trace data.



 

Standard Calibration $780.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ANRITSU S332D. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Communication Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Chirp
A change in the optical frequency caused by direct modulation of the laser. A chirp is a signal in which the frequency increases ('up-chirp') or decreases ('down-chirp') with time. In some sources, the term chirp is used interchangeably with sweep signal.

Nanometer (nm)
A unit of measure used to measure wavelength of light, meaning one one-billionth of a meter

Singlemode Fiber
Singlemode Fiber has a small core, only about 9 microns, and is used for telephony and CATV with laser sources at 1300 and 1550 nm. It can go very long distances at very high speeds. Both multimode and singlemode fiber have an outside diameter of 125 microns - about 5 thousandths of an inch - just slightly larger than a human hair.

Please contact us for your ANRITSU S332D REPAIR and/or ANRITSU S332D 4.0 GHz Site Master Antenna, Cable and Spectrum Analyzer CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: