BK PRECISION 1670A CALIBRATION and BK PRECISION 1670A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 1670A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   BK PRECISION 1670A   Description / Specification:   Spec Sheet 
BK PRECISION 1670A Triple Output DC Power Supply

The B+K Precision 1670A is a general purpose triple output DC power supply. Their main outputs are versatile constant voltage or constant current regulated power source that is variable from 0 to 30 volts and 0 to 3 amps. An indicator lights in the constant current mode, and serves as an overload indicator in the constant voltage mode. The main output voltage and current are continuously monitored by two digital LCD meters with resolution of 0.1 volt and 0.01 amp. Specifications. Number of Outputs: Three (1 variable, 2 fixed). Range: 0-30 V / 0-3 A (variable), 12 V ±5% / 500 mA (fixed), 5 V ± 5% / 500 mA (fixed). Constant Voltage Operation Line Regulation: <= 0.05% + 10 mV (main), <= 1% (fixed output). Constant Voltage Operation Load Regulation: <= 0.05% + 10 mV (main), <= 1% (fixed output). CV Ripple & Noise: <= 5 mV rms. Constant Current (CC) Adjustable Current Range: 5% to 100% (Main). CC Line Regulation: <= 0.4% + 10 mA. CC Load Regulation: <= 0.4% + 10 mA. CC Ripple & Noise: <= 10 mA rms. Display: 3-digit LCDs. Voltmeter Resolution: 0.1 V. Voltmeter Accuracy: ±(1% reading + 2 digits). Ampmeter Resolution: 0.01 A. Ampmeter Accuracy: ±(1% reading + 2 digits). Overload Protection: Current limiting, Reverse polarity, Overvoltage, Short circuit.



 

Standard Calibration $155.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 1670A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your BK PRECISION 1670A CALIBRATION and/or BK PRECISION 1670A Triple Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: