BK PRECISION 2706A CALIBRATION and BK PRECISION 2706A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 2706A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   BK PRECISION 2706A   Description / Specification:   Spec Sheet 
BK PRECISION 2706A Tool Kit DMM with Temperature

The B+K Precision 2706A Tool Kit DMM with Temperature is an excellent meter for most jobs that require flexibility, accuracy and speed. Specifications. DC Volts Ranges: 200 mV, 2 V, 20 V, 200 V, 1000 V. AC Volts Ranges: 200mV, 2 V, 20 V, 200 V, 750 V. DC Current Ranges: 200 µA, 2 mA, 20 mA, 200 mA, 2 A, 10 A. AC Current Ranges: 200 µA, 2 mA, 20 mA, 200 mA, 2 A, 10 A. Resistance Ranges: 200 ohm, 2 k-ohm, 20 k-ohm, 200 k-ohm, 2 M-ohm, 20 M-ohm. Diode Test: Tested at 1.6 mA and 3.2V Max. Transistor Test (hFE): Base Current: 10µA Vce; 2.8V; Gain Indication: 0 to 1,000. Capacitance Ranges: 2,000 pF, 2 nF, 20 nF, 200 nF, 2.0 uF, 20 uF. Frequency Ranges: 2 kHz, 20 kHz, 200 kHz, 2 MHz, 15 MHz. Temperature Range: -4° to + 1400°F (-20° to + 750°C). Continuity Tone: Tone Sounds within 100 mS for Resistance Under 100V. Display: 3 1/2 digit, high-contrast 0.7" LCD, 1999 counts. Sampling: 3 times/sec. (nominal).



 

Standard Calibration $80.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 2706A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

dBm
dBm (sometimes dBmW) is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Zero dBm equals one milliwatt. A 3 dB increase represents roughly doubling the power, a 3 dB decrease, the power is reduced by about one half.

Millimeter-wave
Millimeter-wave is a term that generally refers to frequencies of 26.5 GHz and above. That is where signal wavelengths fall below approximately 10 mm, and thus the terminology changes from centimeters to millimeters.

Power Repeatability
Power Repeatability is the random uncertainty in reproducing the power level after changing and re-setting the power level. The power repeatability is ± half the span (in dB) between the highest and lowest actual power. Note: - The long-term power repeatability can be obtained by taken the power repeatability and power stability into account.

Stability
Stability is the extent to which a specified property, characteristic, or parameter of a substance, device, or apparatus, remains fixed with the passage of time or with varying environmental conditions.

Please contact us for your BK PRECISION 2706A CALIBRATION and/or BK PRECISION 2706A Tool Kit DMM with Temperature REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: