A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 2831D Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our
 used Multimeter DMM page

   BK PRECISION 2831D   Description / Specification:    
BK PRECISION 2831D 4 1/2 Digit True RMS Bench Multimeter

The BK Precision 2831D Digital multimeter is a portable, bench type Digital multimeter with a 4 1/2 digit light-emitting diode. This Digital multimeter can make diode measurements, Frequency measurements & continuity test, in addition to Current, Voltage and Resistance measurements. Features. Basic accuracy for DCV ; 0.05 %. Overload protection on all range. AC/DC Voltage measurement(Up to DC 1200V, AC 750V). AC/DC Current measurement (Up to 20 A). Resistance measurement (Up to 20 M-ohm). Frequency Measurement (Up to 200 KHz). Specifications. DC Volt Range: 2, 20, 200 V (Accuracy ±(0.05% + 5d)), 1200 V (Accuracy @ 1000 V ±(0.1% + 5d)). AC Volt Range (40 Hz to 60 Hz): 2, 20 V (Accuracy ±(0.75% + 10d)). AC Volt Range (50 Hz to 60 Hz): 200, 750 V (Accuracy ±(0.75% + 10d)). DC Current Range: 2, 20, 200 mA (Accuracy ±(0.75% + 5d)), 2 A (Accuracy ±(1.0% + 5d)), 20 A (Accuracy ±(1.0% + 10d)). AC Current Range (50 Hz to 60 Hz): 2, 20, 200 mA (Accuracy ±(0.75% + 10d)), 2000 mA, 20 A (Accuracy ±(1.0% + 10d)). Resistance Range: 2K, 20K, 200K, 2M ohm (Accuracy ±(0.2% + 6d)), 20M ohm (Accuracy ±(1% + 10d)). Frequency Range: 20 KHz (Accuracy ±(1.5% + 5d)), 200 KHz (Accuracy ±(2.0% + 5d)). Audible Continuity: 3 V, treshold Less Than 200 ohm. Diode Test 2V, Approx. 1.0 mA.


Standard Calibration $80.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 2831D. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.

Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your BK PRECISION 2831D CALIBRATION and/or BK PRECISION 2831D 4 1/2 Digit True RMS Bench Multimeter REPAIR

I'm interested in: 
Calibration Type (Select one):

Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:

What is the description of the problem?

How/when did the problem start?

 (*) Required Fields    For formal quote please fill in all fields.
From (Email):*
Contact Name:*
Address 1:
Address 2:
State/Territory/Province: *
Zip/Postal Code: