BK PRECISION 4017A CALIBRATION and BK PRECISION 4017A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 4017A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our  used Function Generator page or new Function Generator page

 
   BK PRECISION 4017A   Description / Specification:   Spec Sheet 
BK PRECISION 4017A 10 MHz Sweep Function Generator

The B&K Precision 4017A 10 MHz Sweep Function Generator is for general bench and lab use with an ideal mixture of features and sweep function. It features Sine, Square, Triangle, Pulse, & Ramp output, Coarse and Fine tuning, 5 digit LED display, Linear and log sweep, Variable duty cycle and Variable DC offset. Specifications. Frequency Range: 0.1 Hz to 10 MHz in 8 ranges. Waveforms: Sine, Square, Triangle, ±Pulse, ±Ramp. Resolution: 5 digits. Tuning Range: 10:1. Fine: ±5% of coarse setting. Variable Duty Cycle: 15:85:15 cont variable. Operating Modes: Normal, Sweep, VCG. Output Impedance: 50 ohm ±10%. Level: 20 V p-p Open circuit, 10V p-p into 50 ohm. Amplitude: Variable, 20 dB range typical. Attenuation: -20 dB ±1dB. DC Offset: Preset ±0.1 V typ, Variable; ±10V open-circuit ±5 into 50 ohm. Sine Wave Distortion: < 3% @ 1 kHz. Flatness: ±5% ±(0.45 dB) 0.1 Hz to 8 MHz, ±20% (2.0 dB) 8 MHz to 10 MHz. Square Wave Risetime (Into 50 ohms): <= 30 nS. TTL Output Level: 0.8V to 2.4V. Rise time: <= 20 nS. CMOS Output Max. Frequency: 2 MHz. Level: 4V to 14V ±0.5 p-p cont. variable. Rise Time: <= 120 nS. VCG Input Voltage: 0 to 10V ±1V causes a 100:1 frequency change. Frequency Counter Accuracy: Time Base Accy ±1 count. Time Base Accuracy: ±10 PPM (23°C ±5°C). Display: 5 digit LED.



 

Standard Calibration $160.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 4017A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your BK PRECISION 4017A CALIBRATION and/or BK PRECISION 4017A 10 MHz Sweep Function Generator REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: