BURLEIGH WA-1100 REPAIR and BURLEIGH WA-1100 CALIBRATION
 
Custom-Cal has a high success rate in the repair of the BURLEIGH WA-1100. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BURLEIGH WA-1100 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Wavelength Meter?
Shop for Comparable Products on our  used Wavelength Meter page

 
   BURLEIGH WA-1100 (WA1100)   Description / Specification:    
BURLEIGH WA-1100 Optical Wavelength Meter

Burleigh WA-1100 Optical Wavelength Meter uses Michelson interferometer-based WAVEMETER technology to determine the absolute wavelength of an optical signal under test by comparing its interference fringe pattern with that of a built-in HeNe laser wavelength standard. Wavelength Range: 700 - 1650 nm (181 - 428 THz). Wavelength Absolute accuracy: ± 1.5 pm. Wavelength Display resolution: 0.001 nm. Power Absolute accuracy: ± 0.5 dB (at ± 30 nm from 1310 and 1550 nm). Power Resolution: 0.01 dB. Power Linearity: ± 0.3 dB. Power Display resolution: 0.01 dB. Optical Input Signal Sensitivity: -30 dBm (0.1 µW), 1200 - 1600 nm; -20 dBm (1.0 µW), 700 - 1650 nm. Maximum input level (sum of all lines): + 10 dBm (10 mW). Measurement Cycle Time: 0.1 s (10 measurements/s). Instrument interface: GPIB (IEEE-488.2), RS-232, LabVIEW, LabWindows.



 

Standard Calibration $515.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BURLEIGH WA-1100. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bit Error Ratio (BER)
Bit Error Ratio (BER) is the ratio of errors caused by the number of bits in a data stream that have been altered due to noise, interference, distoriton or bit synchronization errors.

Flatness
Variation of insertion loss on the passband of an optical device.

Polarization Dependent Loss (PDL)
Polarization Dependent Loss is the difference between the maximum and minimum values of loss due to the variation of the polarization states of light propagating through a device. PDL is expressed in decibels. Calculated by; PDL = 10 log10 (Ep/Es), where EP and ES are the measured diffraction efficiencies for P- and S-plane polarized incident light, respectively.

Return Loss (RL)
Return Loss (RL) is the ratio of the incident power to the reflected power expressed in dB. RL = 10log (Pin/Pback)

Wavelength Resolution
Wavelength Resolution is the smallest possible displayed wavelength increment/decrement.

Please contact us for your BURLEIGH WA-1100 REPAIR and/or BURLEIGH WA-1100 Optical Wavelength Meter CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: