EXFO FTB-7500E CALIBRATION and EXFO FTB-7500E REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the EXFO FTB-7500E Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another OTDR? Shop for Comparable Products on our   new OTDR page

 
   EXFO FTB-7500E   Description / Specification:    
EXFO FTB-7500E Metro / Long Haul OTDR Module

The Exfo FTB-7500E Series metro/long haul OTDR has dynamic range of up to 45 dB. Event dead zone of 0.8 m and attenuation dead zone of 4m. Industry-leading linearity of ± 0.03 dB/dB. EXFO Connect-compatible: automated asset management; data goes through the cloud and into a dynamic database. Metro network testing. Long-haul network testing. High Dynamic range combined with high resolution for truly accurate fiber characterization. EXFO Connect pushes and stores test equipment and test data content automatically in the cloud, allowing you to streamline test operation from build-out to maintenance. Wavelengths (nm) 1310 ± 20/1550 ± 20/1625 ± 10. Dynamic range at 20 µs (dB) 45/45/45. Event dead zone (m) 0.8. Attenuation dead zone (m) 4/4.5/4.5. Distance range (km) 1.25, 2.5, 5, 10, 20, 40, 80, 160, 260, 400. Pulse width (ns) 5, 10, 30, 100, 275, 1000, 2500, 10 000, 20 000. Linearity (dB/dB) ± 0.03. Loss threshold (dB) 0.01. Loss resolution (dB) 0.001. Sampling resolution (m) 0.04 to 5. Sampling points Up to 256 000. Distance uncertainty (m) ± (0.75 + 0.001 % x distance + sampling resolution). Measurement time User-defined (5 sec. minimum to 60 min. maximum). Typical real-time refresh (Hz) 4. Stable source output power (dBm) –1 (7500E-0023B). Visual fault locator (optional) Laser, 650 nm ± 10 nm, CW, P in 62.5/125 µm: 1.5 dBm (1.4 mW).



 

Standard Calibration $480.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the EXFO FTB-7500E. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a contiguous set of frequencies within which a fiber optic component, link or network will operate.

Extinction Ratio (ER)
Extinction Ratio is the ratio of two optical power levels, of a digital signal generated by an optical source, (example a laser diode), where P1 is the optical power level generated when the light source is "on," and P0 is the power level generated when the light source is "off." The extinction ratio may be expressed as a fraction, in dB, or as a percentage.

Optical Signal-to-noise Ratio (OSNR)
Optical Signal-to-noise ratio is the ratio between the signal power and the noise power in a given bandwidth. Most commonly a reference bandwidth of 0.1 nm is used. This bandwidth is independent from the modulation format, the frequency and the receiver. For instance a OSNR of 20dB/0.1nm could be given, even the signal of 40 GBit DPSK would not fit in this bandwidth. OSNR is measured with a Optical Spectrum Analyzer. It is generally measured at the wavelength of interest.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Wavelength Repeatability
Wavelength Repeatability is the random uncertainty in reproducing a wavelength after detuning and re-setting the wavelength. The wavelength repeatability is ± half the span between the maximum and the minimum value of all actual values of these wavelengths. Example test condition: uninterrupted TLS output power, constant power level, temperature within operating temperature range, coherence control off, short time span. Note: NOTE The long-term wavelength repeatability can be obtained by taken the wavelength repeatability and wavelength stability into account.

Please contact us for your EXFO FTB-7500E CALIBRATION and/or EXFO FTB-7500E Metro / Long Haul OTDR Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: