EXFO IQ-2112D CALIBRATION and EXFO IQ-2112D REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the EXFO IQ-2112D Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Laser Source (DFB-LD-WDM-BBS)?
Shop for Comparable Products on our  used Laser Source (DFB-LD-WDM-BBS) page or new Laser Source (DFB-LD-WDM-BBS) page

 
   EXFO IQ-2112D (IQ 2112D)   Description / Specification:   Spec Sheet 
EXFO IQ-2112D 850/1300 nm Surface-Emitting LED Source Module

The EXFO IQ-2112D Dual Surface-Emitting LED Light Source was designed for optimal stability. It is suitable for laboratory, manufacturing, testing environments, quality control, calibration, acceptance testing, and loss and return loss testing. The IQ-2112D features variable output power over a 6 dB range to simulate power losses with precision. The power can be fine-tuned in increments of 0.1 dB. The IQ-2112D is a module that is housed in the IQ-200 Optical Test System. It operates as a single test unit in the IQ-200 or combines with other test equipment to create a true multi-tasking environment in the IQ-200. Specifications. Wavelength: 850 ±25 nm, 1300 +50/-60 nm. Spectral width (FWHM): <= 50/145 nm. Output power: >= -15/-20 dBm. Stability 15 min. (T = constant): ±0.005 dB. Stability 8 hr. (T = 0° to 50° ±1°C): ±0.05 dB. Temperature sensitivity: <= 0.4 dB. Modulation: 270 Hz, 1kHz, 2kHz (50% duty cycle).



 

Standard Calibration $255.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the EXFO IQ-2112D. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Absolute Wavelength Accuracy
Absolute Wavelength Accuracy is the maximum difference between the actual wavelength and the displayed wavelength of the Optical Source. Wavelength is defined as wavelength in vacuum.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Nanometer (nm)
A unit of measure used to measure wavelength of light, meaning one one-billionth of a meter

Relative Intensity Noise (RIN)
Relative intensity noise (RIN), describes the instability in the power level of a laser. The noise term is important to describe lasers used in fiber-optic communication and LIDAR remote sensing. It is the square of the (spectrally resolved) RMS optical power amplitude divided by the measurement bandwidth and the square of the average optical power, expressed in dB/Hz.

Total Return loss
In an optical fiber, the loss that takes place at any discontinuity of refractive index, especially at an air-glass interface such as a fiber endface, at which a fraction of the optical signal is reflected back toward the source. RL = - 10log10 (Preflected/Preference)

Please contact us for your EXFO IQ-2112D CALIBRATION and/or EXFO IQ-2112D 850/1300 nm Surface-Emitting LED Source Module REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: