FLUKE 30 CALIBRATION and FLUKE 30 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 30 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   FLUKE 30   Description / Specification:    
FLUKE 30 400 Amp AC Clamp Meter

The Fluke Model 30 Clamp Meter is a rugged, self-contained, general purpose clamp meter for troubleshooting industrial, commercial, hospital and residential electrical and HVAC systems. It measures ac current, ac volts, ohms and continuity. Tapered jaws allow easy access in crowded junction boxes. Built-in overload protection is provided to 600A continuous/600V, meeting UL and TUV certification standards.
Specifications.

AC Current.
Range: 400A, 200A.
Resolution: 1A, 1A, 0.1A.
Accuracy: N/A, ±(1.3%+3), 0-100A: ±(1.8%+8), 100-200A: ±(1.4%+0).

AC Volts 50/60 Hz.
Range: 200V, 600V.
Resolution: 0.1V, 1.0V.
Accuracy: ±(1.2%+3).

Resistance.
Range: 200 Ω.
Resolution: 0.1 Ω.
Accuracy: ±(1.5%+2).

Crest Factor Range: 400A, 200.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your FLUKE 30 CALIBRATION and/or FLUKE 30 400 Amp AC Clamp Meter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: