FLUKE 83 CALIBRATION and FLUKE 83 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the FLUKE 83 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Multimeter DMM?
Shop for Comparable Products on our  used Multimeter DMM page

 
   FLUKE 83   Description / Specification:    
FLUKE 83 Handheld Digital Multimeter

The Fluke 83 Handheld Digital Multimeter is a 4000 count digital instrument for use in the laboratory, field, and home. The meter combines the precision of a digital meter with the speed and versatility of a high resolution bar graph, featuring a zoom function that increases sensitivity by a factor of 10. Frequencies between 0.5 Hz and 200 kHz can be measured with up to 0.01 Hz resolution. The meter also provides a Min/Max recording mode, an alternate frequency counter that measures duty cycle, Input Alert, and Relative, Touch Hold, and Capacitance modes.
Specifications.

DC Voltage.
Range: 400 mV to 1000 V.
Resolution: 0.1 mV to 1 V.

AC Voltage.
Range: 400 mV to 1000 V.
Resolution: 1 mV to 1 V.

Resistance.
Range: 400 Ω to 40 MΩ.
Resolution: 0.1Ω to 10 kΩ.

Capacitance.
Range: 5 nF to 5 µF.
Resolution: 0.01 nF to 0.01 µF.

DC/AC Current.
Range: 40 mA to 10 A.
Resolution: 0.01 mA to 0.01 A.
Accuracy: 2% +/- 2.

Frequency.
Range: 199.9 Hz to >200 kHz.
Resolution: 0.01 Hz to 0.1 kHz.
Accuracy: 0.005% +/- 1.



 



Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your FLUKE 83 CALIBRATION and/or FLUKE 83 Handheld Digital Multimeter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: